Open Menu / drivers / video / lm3533_backlight.c
Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com>
 */

#define LOG_CATEGORY UCLASS_PANEL_BACKLIGHT

#include <backlight.h>
#include <dm.h>
#include <i2c.h>
#include <log.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <asm/gpio.h>

#define LM3533_BL_MIN_BRIGHTNESS			0x02
#define LM3533_BL_MAX_BRIGHTNESS			0xFF

#define LM3533_SINK_OUTPUT_CONFIG_1			0x10
#define LM3533_CONTROL_BANK_A_PWM			0x14
#define LM3533_CONTROL_BANK_AB_BRIGHTNESS		0x1A
#define LM3533_CONTROL_BANK_A_FULLSCALE_CURRENT		0x1F
#define LM3533_CONTROL_BANK_ENABLE			0x27
#define LM3533_OVP_FREQUENCY_PWM_POLARITY		0x2C
#define LM3533_BRIGHTNESS_REGISTER_A			0x40

struct lm3533_backlight_priv {
	struct gpio_desc enable_gpio;
	u32 def_bl_lvl;
};

static int lm3533_backlight_enable(struct udevice *dev)
{
	struct lm3533_backlight_priv *priv = dev_get_priv(dev);
	int ret;

	dm_gpio_set_value(&priv->enable_gpio, 1);
	mdelay(5);

	/* HVLED 1 & 2 are controlled by Bank A */
	ret = dm_i2c_reg_write(dev, LM3533_SINK_OUTPUT_CONFIG_1, 0x00);
	if (ret)
		return ret;

	/* PWM input is disabled for CABC */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_A_PWM, 0x00);
	if (ret)
		return ret;

	/* Linear & Control Bank A is configured for register Current control */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_AB_BRIGHTNESS, 0x02);
	if (ret)
		return ret;

	/* Full-Scale Current (20.2mA) */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_A_FULLSCALE_CURRENT, 0x13);
	if (ret)
		return ret;

	/* Control Bank A is enable */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_ENABLE, 0x01);
	if (ret)
		return ret;

	ret = dm_i2c_reg_write(dev, LM3533_OVP_FREQUENCY_PWM_POLARITY, 0x0A);
	if (ret)
		return ret;

	return 0;
}

static int lm3533_backlight_set_brightness(struct udevice *dev, int percent)
{
	struct lm3533_backlight_priv *priv = dev_get_priv(dev);
	int ret;

	if (percent == BACKLIGHT_DEFAULT)
		percent = priv->def_bl_lvl;

	if (percent < LM3533_BL_MIN_BRIGHTNESS)
		percent = LM3533_BL_MIN_BRIGHTNESS;

	if (percent > LM3533_BL_MAX_BRIGHTNESS)
		percent = LM3533_BL_MAX_BRIGHTNESS;

	/* Set brightness level */
	ret = dm_i2c_reg_write(dev, LM3533_BRIGHTNESS_REGISTER_A,
			       percent);
	if (ret)
		return ret;

	return 0;
}

static int lm3533_backlight_probe(struct udevice *dev)
{
	struct lm3533_backlight_priv *priv = dev_get_priv(dev);
	int ret;

	if (device_get_uclass_id(dev->parent) != UCLASS_I2C)
		return -EPROTONOSUPPORT;

	ret = gpio_request_by_name(dev, "enable-gpios", 0,
				   &priv->enable_gpio, GPIOD_IS_OUT);
	if (ret) {
		log_err("Could not decode enable-gpios (%d)\n", ret);
		return ret;
	}

	priv->def_bl_lvl = dev_read_u32_default(dev, "default-brightness-level",
						LM3533_BL_MAX_BRIGHTNESS);

	return 0;
}

static const struct backlight_ops lm3533_backlight_ops = {
	.enable = lm3533_backlight_enable,
	.set_brightness = lm3533_backlight_set_brightness,
};

static const struct udevice_id lm3533_backlight_ids[] = {
	{ .compatible = "ti,lm3533" },
	{ }
};

U_BOOT_DRIVER(lm3533_backlight) = {
	.name		= "lm3533_backlight",
	.id		= UCLASS_PANEL_BACKLIGHT,
	.of_match	= lm3533_backlight_ids,
	.probe		= lm3533_backlight_probe,
	.ops		= &lm3533_backlight_ops,
	.priv_auto	= sizeof(struct lm3533_backlight_priv),
};