Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 | .. SPDX-License-Identifier: GPL-2.0+ imx943_evk ======================= U-Boot for the NXP i.MX943 19x19 EVK board Quick Start ----------- - Get ahab-container.img - Get DDR PHY Firmware Images - Get and Build OEI Images - Get and Build System Manager Image - Get and Build the ARM Trusted Firmware - Build the Bootloader Image - Boot Get ahab-container.img -------------------------------------- Note: srctree is U-Boot source directory .. code-block:: bash $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-ele-imx-2.0.2-89161a8.bin $ sh firmware-ele-imx-2.0.2-89161a8.bin --auto-accept $ cp firmware-ele-imx-2.0.2-89161a8/mx943a0-ahab-container.img $(srctree) Get DDR PHY Firmware Images -------------------------------------- Note: srctree is U-Boot source directory .. code-block:: bash $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.28-994fa14.bin $ sh firmware-imx-8.28-994fa14.bin --auto-accept $ cp firmware-imx-8.28-994fa14/firmware/ddr/synopsys/lpddr5*v202409.bin $(srctree) Get and Build OEI Images -------------------------------------- Note: srctree is U-Boot source directory Get OEI from: https://github.com/nxp-imx/imx-oei branch: master .. code-block:: bash $ sudo apt -y install make gcc g++-multilib srecord $ wget https://developer.arm.com/-/media/Files/downloads/gnu/13.3.rel1/binrel/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi.tar.xz $ tar xvf arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi.tar.xz $ export TOOLS=$PWD $ git clone -b master https://github.com/nxp-imx/imx-oei.git $ cd imx-oei $ make board=mx943lp5-19 oei=ddr DEBUG=1 all $ cp build/mx943lp5-19/ddr/oei-m33-ddr.bin $(srctree) Get and Build System Manager Image -------------------------------------- Note: srctree is U-Boot source directory Get System Manager from: https://github.com/nxp-imx/imx-sm branch: master .. code-block:: bash $ sudo apt -y install make gcc g++-multilib srecord $ wget https://developer.arm.com/-/media/Files/downloads/gnu/13.3.rel1/binrel/arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi.tar.xz $ tar xvf arm-gnu-toolchain-13.3.rel1-x86_64-arm-none-eabi.tar.xz $ export TOOLS=$PWD $ git clone -b master https://github.com/nxp-imx/imx-sm.git $ cd imx-sm $ make config=mx94evk all $ cp build/mx94evk/m33_image.bin $(srctree) Get and Build the ARM Trusted Firmware -------------------------------------- Note: srctree is U-Boot source directory Get ATF from: https://github.com/nxp-imx/imx-atf/ branch: lf_v2.12 .. code-block:: bash $ export CROSS_COMPILE=aarch64-poky-linux- $ unset LDFLAGS $ unset AS $ git clone -b lf_v2.12 https://github.com/nxp-imx/imx-atf.git $ cd imx-atf $ make PLAT=imx94 bl31 $ cp build/imx94/release/bl31.bin $(srctree) Build the Bootloader Image -------------------------- .. code-block:: bash $ export CROSS_COMPILE=aarch64-poky-linux- $ make imx943_evk_defconfig $ make Copy flash.bin to the MicroSD card: .. code-block:: bash $ sudo dd if=flash.bin of=/dev/sd[x] bs=1k seek=32 conv=fsync Boot ---- Set i.MX943 boot device to MicroSD card |