// SPDX-License-Identifier: BSD-3-Clause
/*
* Clock drivers for Qualcomm qcm2290
*
* (C) Copyright 2024 Linaro Ltd.
*/
#include <clk-uclass.h>
#include <dm.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <linux/bug.h>
#include <linux/bitops.h>
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
#include "clock-qcom.h"
#define QUPV3_WRAP0_S4_CMD_RCGR 0x1f608
#define SDCC2_APPS_CLK_CMD_RCGR 0x1e00c
static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = {
F(7372800, CFG_CLK_SRC_GPLL0_AUX2, 1, 384, 15625),
F(14745600, CFG_CLK_SRC_GPLL0_AUX2, 1, 768, 15625),
F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
F(29491200, CFG_CLK_SRC_GPLL0_AUX2, 1, 1536, 15625),
F(32000000, CFG_CLK_SRC_GPLL0_AUX2, 1, 8, 75),
F(48000000, CFG_CLK_SRC_GPLL0_AUX2, 1, 4, 25),
F(64000000, CFG_CLK_SRC_GPLL0_AUX2, 1, 16, 75),
F(75000000, CFG_CLK_SRC_GPLL0_AUX2, 4, 0, 0),
F(80000000, CFG_CLK_SRC_GPLL0_AUX2, 1, 4, 15),
F(96000000, CFG_CLK_SRC_GPLL0_AUX2, 1, 8, 25),
F(100000000, CFG_CLK_SRC_GPLL0_AUX2, 3, 0, 0),
F(102400000, CFG_CLK_SRC_GPLL0_AUX2, 1, 128, 375),
F(112000000, CFG_CLK_SRC_GPLL0_AUX2, 1, 28, 75),
F(117964800, CFG_CLK_SRC_GPLL0_AUX2, 1, 6144, 15625),
F(120000000, CFG_CLK_SRC_GPLL0_AUX2, 2.5, 0, 0),
F(128000000, CFG_CLK_SRC_GPLL6, 3, 0, 0),
{}
};
static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk_src[] = {
F(400000, CFG_CLK_SRC_CXO, 12, 1, 4),
F(19200000, CFG_CLK_SRC_CXO, 1, 0, 0),
F(25000000, CFG_CLK_SRC_GPLL0_AUX2, 12, 0, 0),
F(50000000, CFG_CLK_SRC_GPLL0_AUX2, 6, 0, 0),
F(100000000, CFG_CLK_SRC_GPLL0_AUX2, 3, 0, 0),
F(202000000, CFG_CLK_SRC_GPLL7, 4, 0, 0), // 6.5, 1, 4
{}
};
static const struct pll_vote_clk gpll7_clk = {
.status = 0x7000,
.status_bit = BIT(31),
.ena_vote = 0x79000,
.vote_bit = BIT(7),
};
static const struct gate_clk qcm2290_clks[] = {
GATE_CLK(GCC_AHB2PHY_USB_CLK, 0x1d008, 0x00000001),
GATE_CLK(GCC_CFG_NOC_USB3_PRIM_AXI_CLK, 0x1a084, 0x00000001),
GATE_CLK(GCC_QUPV3_WRAP0_CORE_2X_CLK, 0x7900c, 0x00000200),
GATE_CLK(GCC_QUPV3_WRAP0_CORE_CLK, 0x7900c, 0x00000100),
GATE_CLK(GCC_QUPV3_WRAP0_S0_CLK, 0x7900c, 0x00000400),
GATE_CLK(GCC_QUPV3_WRAP0_S1_CLK, 0x7900c, 0x00000800),
GATE_CLK(GCC_QUPV3_WRAP0_S2_CLK, 0x7900c, 0x00001000),
GATE_CLK(GCC_QUPV3_WRAP0_S3_CLK, 0x7900c, 0x00002000),
GATE_CLK(GCC_QUPV3_WRAP0_S4_CLK, 0x7900c, 0x00004000),
GATE_CLK(GCC_QUPV3_WRAP0_S5_CLK, 0x7900c, 0x00008000),
GATE_CLK(GCC_QUPV3_WRAP_0_M_AHB_CLK, 0x7900c, 0x00000040),
GATE_CLK(GCC_QUPV3_WRAP_0_S_AHB_CLK, 0x7900c, 0x00000080),
GATE_CLK(GCC_SDCC1_AHB_CLK, 0x38008, 0x00000001),
GATE_CLK(GCC_SDCC1_APPS_CLK, 0x38004, 0x00000001),
GATE_CLK(GCC_SDCC1_ICE_CORE_CLK, 0x3800c, 0x00000001),
GATE_CLK(GCC_SDCC2_AHB_CLK, 0x1e008, 0x00000001),
GATE_CLK(GCC_SDCC2_APPS_CLK, 0x1e004, 0x00000001),
GATE_CLK(GCC_SYS_NOC_CPUSS_AHB_CLK, 0x79004, 0x00000001),
GATE_CLK(GCC_SYS_NOC_USB3_PRIM_AXI_CLK, 0x1a080, 0x00000001),
GATE_CLK(GCC_USB30_PRIM_MASTER_CLK, 0x1a010, 0x00000001),
GATE_CLK(GCC_USB30_PRIM_MOCK_UTMI_CLK, 0x1a018, 0x00000001),
GATE_CLK(GCC_USB30_PRIM_SLEEP_CLK, 0x1a014, 0x00000001),
GATE_CLK(GCC_USB3_PRIM_CLKREF_CLK, 0x9f000, 0x00000001),
GATE_CLK(GCC_USB3_PRIM_PHY_COM_AUX_CLK, 0x1a054, 0x00000001),
GATE_CLK(GCC_USB3_PRIM_PHY_PIPE_CLK, 0x1a058, 0x00000001),
};
static ulong qcm2290_set_rate(struct clk *clk, ulong rate)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
const struct freq_tbl *freq;
debug("%s: clk %s rate %lu\n", __func__, qcm2290_clks[clk->id].name, rate);
switch (clk->id) {
case GCC_QUPV3_WRAP0_S4_CLK: /*UART2*/
freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);
clk_rcg_set_rate_mnd(priv->base, QUPV3_WRAP0_S4_CMD_RCGR,
freq->pre_div, freq->m, freq->n, freq->src,
16);
return 0;
case GCC_SDCC2_APPS_CLK:
/* Enable GPLL7 so we can point SDCC2_APPS_CLK_SRC RCG at it */
clk_enable_gpll0(priv->base, &gpll7_clk);
freq = qcom_find_freq(ftbl_gcc_sdcc2_apps_clk_src, rate);
WARN(freq->src != CFG_CLK_SRC_GPLL7,
"SDCC2_APPS_CLK_SRC not set to GPLL7, requested rate %lu\n",
rate);
clk_rcg_set_rate_mnd(priv->base, SDCC2_APPS_CLK_CMD_RCGR,
freq->pre_div, freq->m, freq->n, freq->src,
8);
return freq->freq;
case GCC_SDCC1_APPS_CLK:
/* The firmware turns this on for us and always sets it to this rate */
return 384000000;
default:
return 0;
}
}
static int qcm2290_enable(struct clk *clk)
{
struct msm_clk_priv *priv = dev_get_priv(clk->dev);
if (priv->data->num_clks < clk->id) {
debug("%s: unknown clk id %lu\n", __func__, clk->id);
return 0;
}
debug("%s: clk %s\n", __func__, qcm2290_clks[clk->id].name);
switch (clk->id) {
case GCC_USB30_PRIM_MASTER_CLK:
qcom_gate_clk_en(priv, GCC_USB3_PRIM_PHY_COM_AUX_CLK);
qcom_gate_clk_en(priv, GCC_USB3_PRIM_CLKREF_CLK);
break;
}
return qcom_gate_clk_en(priv, clk->id);
}
static const struct qcom_reset_map qcm2290_gcc_resets[] = {
[GCC_CAMSS_OPE_BCR] = { 0x55000 },
[GCC_CAMSS_TFE_BCR] = { 0x52000 },
[GCC_CAMSS_TOP_BCR] = { 0x58000 },
[GCC_GPU_BCR] = { 0x36000 },
[GCC_MMSS_BCR] = { 0x17000 },
[GCC_PDM_BCR] = { 0x20000 },
[GCC_QUPV3_WRAPPER_0_BCR] = { 0x1f000 },
[GCC_QUSB2PHY_PRIM_BCR] = { 0x1c000 },
[GCC_SDCC1_BCR] = { 0x38000 },
[GCC_SDCC2_BCR] = { 0x1e000 },
[GCC_USB30_PRIM_BCR] = { 0x1a000 },
[GCC_USB3_PHY_PRIM_SP0_BCR] = { 0x1b000 },
[GCC_USB3PHY_PHY_PRIM_SP0_BCR] = { 0x1b008 },
[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x1d000 },
[GCC_VCODEC0_BCR] = { 0x58094 },
[GCC_VENUS_BCR] = { 0x58078 },
[GCC_VIDEO_INTERFACE_BCR] = { 0x6e000 },
};
static const struct qcom_power_map qcm2290_gdscs[] = {
[GCC_USB30_PRIM_GDSC] = { 0x1a004 },
};
static struct msm_clk_data qcm2290_gcc_data = {
.resets = qcm2290_gcc_resets,
.num_resets = ARRAY_SIZE(qcm2290_gcc_resets),
.clks = qcm2290_clks,
.num_clks = ARRAY_SIZE(qcm2290_clks),
.power_domains = qcm2290_gdscs,
.num_power_domains = ARRAY_SIZE(qcm2290_gdscs),
.enable = qcm2290_enable,
.set_rate = qcm2290_set_rate,
};
static const struct udevice_id gcc_qcm2290_of_match[] = {
{
.compatible = "qcom,gcc-qcm2290",
.data = (ulong)&qcm2290_gcc_data,
},
{}
};
U_BOOT_DRIVER(gcc_qcm2290) = {
.name = "gcc_qcm2290",
.id = UCLASS_NOP,
.of_match = gcc_qcm2290_of_match,
.bind = qcom_cc_bind,
.flags = DM_FLAG_PRE_RELOC,
};