Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 | // SPDX-License-Identifier: GPL-2.0+ /* * (C) Copyright 2001-2008 * Copyright 2020 NXP * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * Keith Outwater, keith_outwater@mvis.com` */ /* * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) * DS1337 Real Time Clock (RTC). */ #include <config.h> #include <command.h> #include <dm.h> #include <log.h> #include <rtc.h> #include <i2c.h> /* * RTC register addresses */ #if defined CONFIG_RTC_DS1337 #define RTC_SEC_REG_ADDR 0x0 #define RTC_MIN_REG_ADDR 0x1 #define RTC_HR_REG_ADDR 0x2 #define RTC_DAY_REG_ADDR 0x3 #define RTC_DATE_REG_ADDR 0x4 #define RTC_MON_REG_ADDR 0x5 #define RTC_YR_REG_ADDR 0x6 #define RTC_CTL_REG_ADDR 0x0e #define RTC_STAT_REG_ADDR 0x0f #define RTC_TC_REG_ADDR 0x10 #elif defined CONFIG_RTC_DS1388 #define RTC_SEC_REG_ADDR 0x1 #define RTC_MIN_REG_ADDR 0x2 #define RTC_HR_REG_ADDR 0x3 #define RTC_DAY_REG_ADDR 0x4 #define RTC_DATE_REG_ADDR 0x5 #define RTC_MON_REG_ADDR 0x6 #define RTC_YR_REG_ADDR 0x7 #define RTC_CTL_REG_ADDR 0x0c #define RTC_STAT_REG_ADDR 0x0b #define RTC_TC_REG_ADDR 0x0a #endif /* * RTC control register bits */ #define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */ #define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */ #define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */ #define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */ #define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */ #define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */ /* * RTC status register bits */ #define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */ #define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */ #define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */ #if !CONFIG_IS_ENABLED(DM_RTC) static uchar rtc_read (uchar reg); static void rtc_write (uchar reg, uchar val); /* * Get the current time from the RTC */ int rtc_get (struct rtc_time *tmp) { int rel = 0; uchar sec, min, hour, mday, wday, mon_cent, year, control, status; control = rtc_read (RTC_CTL_REG_ADDR); status = rtc_read (RTC_STAT_REG_ADDR); sec = rtc_read (RTC_SEC_REG_ADDR); min = rtc_read (RTC_MIN_REG_ADDR); hour = rtc_read (RTC_HR_REG_ADDR); wday = rtc_read (RTC_DAY_REG_ADDR); mday = rtc_read (RTC_DATE_REG_ADDR); mon_cent = rtc_read (RTC_MON_REG_ADDR); year = rtc_read (RTC_YR_REG_ADDR); /* No century bit, assume year 2000 */ #ifdef CONFIG_RTC_DS1388 mon_cent |= 0x80; #endif debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", year, mon_cent, mday, wday, hour, min, sec, control, status); if (status & RTC_STAT_BIT_OSF) { printf ("### Warning: RTC oscillator has stopped\n"); /* clear the OSF flag */ rtc_write (RTC_STAT_REG_ADDR, rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); rel = -1; } tmp->tm_sec = bcd2bin (sec & 0x7F); tmp->tm_min = bcd2bin (min & 0x7F); tmp->tm_hour = bcd2bin (hour & 0x3F); tmp->tm_mday = bcd2bin (mday & 0x3F); tmp->tm_mon = bcd2bin (mon_cent & 0x1F); tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900); tmp->tm_wday = bcd2bin ((wday - 1) & 0x07); tmp->tm_yday = 0; tmp->tm_isdst= 0; debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); return rel; } /* * Set the RTC */ int rtc_set (struct rtc_time *tmp) { uchar century; debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100)); century = (tmp->tm_year >= 2000) ? 0x80 : 0; rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century); rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1)); rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday)); rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour)); rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min)); rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec)); return 0; } /* * Reset the RTC. We also enable the oscillator output on the * SQW/INTB* pin and program it for 32,768 Hz output. Note that * according to the datasheet, turning on the square wave output * increases the current drain on the backup battery from about * 600 nA to 2uA. Define CONFIG_RTC_DS1337_NOOSC if you wish to turn * off the OSC output. */ #ifdef CONFIG_RTC_DS1337_NOOSC #define RTC_DS1337_RESET_VAL \ (RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) #else #define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) #endif void rtc_reset (void) { #ifdef CONFIG_RTC_DS1337 rtc_write (RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL); #elif defined CONFIG_RTC_DS1388 rtc_write(RTC_CTL_REG_ADDR, 0x0); /* hw default */ #endif #ifdef CONFIG_RTC_DS1339_TCR_VAL rtc_write (RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL); #endif #ifdef CONFIG_RTC_DS1388_TCR_VAL rtc_write(RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL); #endif } /* * Helper functions */ static uchar rtc_read (uchar reg) { return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val) { i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } #else static uchar rtc_read(struct udevice *dev, uchar reg) { return dm_i2c_reg_read(dev, reg); } static void rtc_write(struct udevice *dev, uchar reg, uchar val) { dm_i2c_reg_write(dev, reg, val); } static int ds1337_rtc_get(struct udevice *dev, struct rtc_time *tmp) { int rel = 0; uchar sec, min, hour, mday, wday, mon_cent, year, control, status; control = rtc_read(dev, RTC_CTL_REG_ADDR); status = rtc_read(dev, RTC_STAT_REG_ADDR); sec = rtc_read(dev, RTC_SEC_REG_ADDR); min = rtc_read(dev, RTC_MIN_REG_ADDR); hour = rtc_read(dev, RTC_HR_REG_ADDR); wday = rtc_read(dev, RTC_DAY_REG_ADDR); mday = rtc_read(dev, RTC_DATE_REG_ADDR); mon_cent = rtc_read(dev, RTC_MON_REG_ADDR); year = rtc_read(dev, RTC_YR_REG_ADDR); /* No century bit, assume year 2000 */ #ifdef CONFIG_RTC_DS1388 mon_cent |= 0x80; #endif debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x\n", year, mon_cent, mday, wday); debug("hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", hour, min, sec, control, status); if (status & RTC_STAT_BIT_OSF) { printf("### Warning: RTC oscillator has stopped\n"); /* clear the OSF flag */ rtc_write(dev, RTC_STAT_REG_ADDR, rtc_read(dev, RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); rel = -1; } tmp->tm_sec = bcd2bin(sec & 0x7F); tmp->tm_min = bcd2bin(min & 0x7F); tmp->tm_hour = bcd2bin(hour & 0x3F); tmp->tm_mday = bcd2bin(mday & 0x3F); tmp->tm_mon = bcd2bin(mon_cent & 0x1F); tmp->tm_year = bcd2bin(year) + ((mon_cent & 0x80) ? 2000 : 1900); tmp->tm_wday = bcd2bin((wday - 1) & 0x07); tmp->tm_yday = 0; tmp->tm_isdst = 0; debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); return rel; } static int ds1337_rtc_set(struct udevice *dev, const struct rtc_time *tmp) { uchar century; debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, tmp->tm_hour, tmp->tm_min, tmp->tm_sec); rtc_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100)); century = (tmp->tm_year >= 2000) ? 0x80 : 0; rtc_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon) | century); rtc_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1)); rtc_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday)); rtc_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour)); rtc_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min)); rtc_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec)); return 0; } #ifdef CONFIG_RTC_DS1337_NOOSC #define RTC_DS1337_RESET_VAL \ (RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) #else #define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2) #endif static int ds1337_rtc_reset(struct udevice *dev) { #ifdef CONFIG_RTC_DS1337 rtc_write(dev, RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL); #elif defined CONFIG_RTC_DS1388 rtc_write(dev, RTC_CTL_REG_ADDR, 0x0); /* hw default */ #endif #ifdef CONFIG_RTC_DS1339_TCR_VAL rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL); #endif #ifdef CONFIG_RTC_DS1388_TCR_VAL rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL); #endif return 0; } static const struct rtc_ops ds1337_rtc_ops = { .get = ds1337_rtc_get, .set = ds1337_rtc_set, .reset = ds1337_rtc_reset, }; static const struct udevice_id ds1337_rtc_ids[] = { { .compatible = "ds1337" }, { .compatible = "ds1338" }, { .compatible = "ds1339" }, { } }; U_BOOT_DRIVER(rtc_ds1337) = { .name = "rtc-ds1337", .id = UCLASS_RTC, .of_match = ds1337_rtc_ids, .ops = &ds1337_rtc_ops, }; #endif |