Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 | /* SPDX-License-Identifier: GPL-2.0+ */ /* * Configuration for Amlogic Meson 64bits SoCs * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com> */ #ifndef __MESON64_CONFIG_H #define __MESON64_CONFIG_H /* Generic Interrupt Controller Definitions */ #if (defined(CONFIG_MESON_AXG) || defined(CONFIG_MESON_G12A)) #define GICD_BASE 0xffc01000 #define GICC_BASE 0xffc02000 #elif defined(CONFIG_MESON_A1) #define GICD_BASE 0xff901000 #define GICC_BASE 0xff902000 #else /* MESON GXL and GXBB */ #define GICD_BASE 0xc4301000 #define GICC_BASE 0xc4302000 #endif /* Serial drivers */ /* The following table includes the supported baudrates */ #define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, \ 230400, 250000, 460800, 500000, 1000000, 2000000, 4000000, \ 8000000 } /* For splashscreen */ #ifdef CONFIG_VIDEO #define STDOUT_CFG "vidconsole,serial" #else #define STDOUT_CFG "serial" #endif #ifdef CONFIG_USB_KEYBOARD #define STDIN_CFG "usbkbd,serial" #else #define STDIN_CFG "serial" #endif #define CFG_SYS_SDRAM_BASE 0 /* ROM USB boot support, auto-execute boot.scr at scriptaddr */ #define BOOTENV_DEV_ROMUSB(devtypeu, devtypel, instance) \ "bootcmd_romusb=" \ "if test \"${boot_source}\" = \"usb\" && " \ "test -n \"${scriptaddr}\"; then " \ "echo '(ROM USB boot)'; " \ "source ${scriptaddr}; " \ "fi\0" #define BOOTENV_DEV_NAME_ROMUSB(devtypeu, devtypel, instance) \ "romusb " /* * Fallback to "USB DFU" boot if script is not at scriptaddr * * DFU will expose the kernel_addr_r memory range as DFU entry, * then with `dfu-util --detach`, booting the uploaded image * will be attempted: * $ dfu-util -a 0 -D fitImage * $ dfu-util -a 0 -e */ #if CONFIG_IS_ENABLED(USB_GADGET) && CONFIG_IS_ENABLED(DFU_RAM) #define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) \ "bootcmd_usbdfu=" \ "if test \"${boot_source}\" = \"usb\"; then " \ "dfu 0 ram 0 60;" \ "bootm ${kernel_addr_r};" \ "fi\0" #define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) \ "usbdfu " #else #define BOOTENV_DEV_USB_DFU(devtypeu, devtypel, instance) #define BOOTENV_DEV_NAME_USB_DFU(devtypeu, devtypel, instance) #endif #ifdef CONFIG_CMD_MMC #define BOOT_TARGET_MMC(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) #else #define BOOT_TARGET_MMC(func) #endif #ifdef CONFIG_CMD_USB #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) #else #define BOOT_TARGET_DEVICES_USB(func) #endif #ifdef CONFIG_CMD_NVME #define BOOT_TARGET_NVME(func) func(NVME, nvme, 0) #else #define BOOT_TARGET_NVME(func) #endif #ifdef CONFIG_CMD_SCSI #define BOOT_TARGET_SCSI(func) func(SCSI, scsi, 0) #else #define BOOT_TARGET_SCSI(func) #endif #if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE) #define BOOT_TARGET_PXE(func) func(PXE, pxe, na) #define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na) #elif defined(CONFIG_CMD_DHCP) #define BOOT_TARGET_PXE(func) #define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na) #else #define BOOT_TARGET_PXE(func) #define BOOT_TARGET_DHCP(func) #endif #ifndef BOOT_TARGET_DEVICES #define BOOT_TARGET_DEVICES(func) \ func(ROMUSB, romusb, na) \ func(USB_DFU, usbdfu, na) \ BOOT_TARGET_MMC(func) \ BOOT_TARGET_DEVICES_USB(func) \ BOOT_TARGET_NVME(func) \ BOOT_TARGET_SCSI(func) \ BOOT_TARGET_PXE(func) \ BOOT_TARGET_DHCP(func) #endif #define BOOTM_SIZE __stringify(0x1700000) #define KERNEL_ADDR_R __stringify(0x08080000) #define KERNEL_COMP_ADDR_R __stringify(0x0d080000) #define FDT_ADDR_R __stringify(0x08008000) #define SCRIPT_ADDR_R __stringify(0x08000000) #define PXEFILE_ADDR_R __stringify(0x01080000) #define FDTOVERLAY_ADDR_R __stringify(0x01000000) #define RAMDISK_ADDR_R __stringify(0x13000000) #include <config_distro_bootcmd.h> #ifdef CONFIG_OF_UPSTREAM #define FDTFILE_NAME CONFIG_DEFAULT_DEVICE_TREE ".dtb" #else #define FDTFILE_NAME "amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb" #endif #ifndef CFG_EXTRA_ENV_SETTINGS #define CFG_EXTRA_ENV_SETTINGS \ "stdin=" STDIN_CFG "\0" \ "stdout=" STDOUT_CFG "\0" \ "stderr=" STDOUT_CFG "\0" \ "kernel_comp_addr_r=" KERNEL_COMP_ADDR_R "\0" \ "kernel_comp_size=0x2000000\0" \ "fdt_addr_r=" FDT_ADDR_R "\0" \ "scriptaddr=" SCRIPT_ADDR_R "\0" \ "kernel_addr_r=" KERNEL_ADDR_R "\0" \ "pxefile_addr_r=" PXEFILE_ADDR_R "\0" \ "fdtoverlay_addr_r=" FDTOVERLAY_ADDR_R "\0" \ "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \ "fdtfile=" FDTFILE_NAME "\0" \ "dfu_alt_info=fitimage ram " KERNEL_ADDR_R " 0x4000000 \0" \ BOOTENV #endif #endif /* __MESON64_CONFIG_H */ |