Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 | # SPDX-License-Identifier: GPL-2.0+ # Copyright (c) 2020, Linaro Limited # Author: AKASHI Takahiro <takahiro.akashi@linaro.org> """ U-Boot UEFI: Firmware Update Test This test verifies capsule-on-disk firmware update for raw images """ import pytest from capsule_common import ( capsule_setup, init_content, place_capsule_file, exec_manual_update, check_file_removed, check_file_exist, verify_content, do_reboot_dtb_specified ) @pytest.mark.boardspec('sandbox') @pytest.mark.buildconfigspec('efi_capsule_firmware_raw') @pytest.mark.buildconfigspec('efi_capsule_on_disk') @pytest.mark.buildconfigspec('dfu') @pytest.mark.buildconfigspec('dfu_sf') @pytest.mark.buildconfigspec('cmd_efidebug') @pytest.mark.buildconfigspec('cmd_fat') @pytest.mark.buildconfigspec('cmd_memory') @pytest.mark.buildconfigspec('cmd_nvedit_efi') @pytest.mark.buildconfigspec('cmd_sf') @pytest.mark.slow @pytest.mark.restart class TestEfiCapsuleFirmwareRaw: """ Tests verifying capsule-on-disk firmware update for raw images """ def test_efi_capsule_fw1( self, u_boot_config, ubman, efi_capsule_data): """ Test Case 1 Update U-Boot and U-Boot environment on SPI Flash but with an incorrect GUID value in the capsule No update should happen 0x100000-0x150000: U-Boot binary (but dummy) 0x150000-0x200000: U-Boot environment (but dummy) """ # other tests might have run and the # system might not be in a clean state. # Restart before starting the tests. ubman.restart_uboot() disk_img = efi_capsule_data capsule_files = ['Test03'] with ubman.log.section('Test Case 1-a, before reboot'): capsule_setup(ubman, disk_img, '0x0000000000000004') init_content(ubman, '100000', 'u-boot.bin.old', 'Old') init_content(ubman, '150000', 'u-boot.env.old', 'Old') place_capsule_file(ubman, capsule_files) # reboot ubman.restart_uboot() capsule_early = u_boot_config.buildconfig.get( 'config_efi_capsule_on_disk_early') with ubman.log.section('Test Case 1-b, after reboot'): if not capsule_early: exec_manual_update(ubman, disk_img, capsule_files) # deleted anyway check_file_removed(ubman, disk_img, capsule_files) verify_content(ubman, '100000', 'u-boot:Old') verify_content(ubman, '150000', 'u-boot-env:Old') def test_efi_capsule_fw2( self, u_boot_config, ubman, efi_capsule_data): """ Test Case 2 Update U-Boot and U-Boot environment on SPI Flash but with OsIndications unset No update should happen unless CONFIG_EFI_IGNORE_OSINDICATIONS is set 0x100000-0x150000: U-Boot binary (but dummy) 0x150000-0x200000: U-Boot environment (but dummy) """ disk_img = efi_capsule_data capsule_files = ['Test01', 'Test02'] with ubman.log.section('Test Case 2-a, before reboot'): capsule_setup(ubman, disk_img, None) init_content(ubman, '100000', 'u-boot.bin.old', 'Old') init_content(ubman, '150000', 'u-boot.env.old', 'Old') place_capsule_file(ubman, capsule_files) # reboot ubman.restart_uboot() ignore_os_indications = u_boot_config.buildconfig.get( 'config_efi_ignore_osindications') need_reboot = True if ignore_os_indications else False capsule_auth = u_boot_config.buildconfig.get( 'config_efi_capsule_authenticate') capsule_early = u_boot_config.buildconfig.get( 'config_efi_capsule_on_disk_early') with ubman.log.section('Test Case 2-b, after reboot'): if not capsule_early: exec_manual_update(ubman, disk_img, capsule_files, need_reboot) if not ignore_os_indications: check_file_exist(ubman, disk_img, capsule_files) expected = 'u-boot:New' if (ignore_os_indications and not capsule_auth) else 'u-boot:Old' verify_content(ubman, '100000', expected) expected = 'u-boot-env:New' if (ignore_os_indications and not capsule_auth) else 'u-boot-env:Old' verify_content(ubman, '150000', expected) def test_efi_capsule_fw3( self, u_boot_config, ubman, efi_capsule_data): """ Test Case 3 Update U-Boot on SPI Flash, raw image format 0x100000-0x150000: U-Boot binary (but dummy) """ disk_img = efi_capsule_data capsule_files = ['Test01', 'Test02'] with ubman.log.section('Test Case 3-a, before reboot'): capsule_setup(ubman, disk_img, '0x0000000000000004') init_content(ubman, '100000', 'u-boot.bin.old', 'Old') init_content(ubman, '150000', 'u-boot.env.old', 'Old') place_capsule_file(ubman, capsule_files) capsule_early = u_boot_config.buildconfig.get( 'config_efi_capsule_on_disk_early') capsule_auth = u_boot_config.buildconfig.get( 'config_efi_capsule_authenticate') # reboot ubman.restart_uboot(expect_reset = capsule_early) with ubman.log.section('Test Case 3-b, after reboot'): if not capsule_early: exec_manual_update(ubman, disk_img, capsule_files) # make sure the dfu_alt_info exists because it is required for making ESRT. output = ubman.run_command_list([ 'env set dfu_alt_info "sf 0:0=u-boot-bin raw 0x100000 0x50000;u-boot-env raw 0x150000 0x200000"', 'efidebug capsule esrt']) # ensure that SANDBOX_UBOOT_ENV_IMAGE_GUID is in the ESRT. assert '9E339473-C2EB-530A-A69B-0CD6BBBED40E' in ''.join(output) # ensure that SANDBOX_UBOOT_IMAGE_GUID is in the ESRT. assert '985F2937-7C2E-5E9A-8A5E-8E063312964B' in ''.join(output) check_file_removed(ubman, disk_img, capsule_files) expected = 'u-boot:Old' if capsule_auth else 'u-boot:New' verify_content(ubman, '100000', expected) expected = 'u-boot-env:Old' if capsule_auth else 'u-boot-env:New' verify_content(ubman, '150000', expected) def test_efi_capsule_fw4( self, u_boot_config, ubman, efi_capsule_data): """ Test Case 4 Update U-Boot on SPI Flash, raw image format with fw_version and lowest_supported_version 0x100000-0x150000: U-Boot binary (but dummy) 0x150000-0x200000: U-Boot environment (but dummy) """ disk_img = efi_capsule_data capsule_files = ['Test101', 'Test102'] with ubman.log.section('Test Case 4-a, before reboot'): capsule_setup(ubman, disk_img, '0x0000000000000004') init_content(ubman, '100000', 'u-boot.bin.old', 'Old') init_content(ubman, '150000', 'u-boot.env.old', 'Old') place_capsule_file(ubman, capsule_files) # reboot do_reboot_dtb_specified(u_boot_config, ubman, 'test_ver.dtb') capsule_early = u_boot_config.buildconfig.get( 'config_efi_capsule_on_disk_early') capsule_auth = u_boot_config.buildconfig.get( 'config_efi_capsule_authenticate') with ubman.log.section('Test Case 4-b, after reboot'): if not capsule_early: exec_manual_update(ubman, disk_img, capsule_files) # deleted anyway check_file_removed(ubman, disk_img, capsule_files) # make sure the dfu_alt_info exists because it is required for making ESRT. output = ubman.run_command_list([ 'env set dfu_alt_info "sf 0:0=u-boot-bin raw 0x100000 0x50000' 'u-boot-env raw 0x150000 0x200000"', 'efidebug capsule esrt']) if capsule_auth: # capsule authentication failed verify_content(ubman, '100000', 'u-boot:Old') verify_content(ubman, '150000', 'u-boot-env:Old') else: # ensure that SANDBOX_UBOOT_IMAGE_GUID is in the ESRT. assert '985F2937-7C2E-5E9A-8A5E-8E063312964B' in ''.join(output) assert 'ESRT: fw_version=5' in ''.join(output) assert 'ESRT: lowest_supported_fw_version=3' in ''.join(output) # ensure that SANDBOX_UBOOT_ENV_IMAGE_GUID is in the ESRT. assert '9E339473-C2EB-530A-A69B-0CD6BBBED40E' in ''.join(output) assert 'ESRT: fw_version=10' in ''.join(output) assert 'ESRT: lowest_supported_fw_version=7' in ''.join(output) verify_content(ubman, '100000', 'u-boot:New') verify_content(ubman, '150000', 'u-boot-env:New') def test_efi_capsule_fw5( self, u_boot_config, ubman, efi_capsule_data): """ Test Case 5 Update U-Boot on SPI Flash, raw image format with fw_version and lowest_supported_version but fw_version is lower than lowest_supported_version No update should happen 0x100000-0x150000: U-Boot binary (but dummy) """ disk_img = efi_capsule_data capsule_files = ['Test103'] with ubman.log.section('Test Case 5-a, before reboot'): capsule_setup(ubman, disk_img, '0x0000000000000004') init_content(ubman, '100000', 'u-boot.bin.old', 'Old') place_capsule_file(ubman, capsule_files) # reboot do_reboot_dtb_specified(u_boot_config, ubman, 'test_ver.dtb') capsule_early = u_boot_config.buildconfig.get( 'config_efi_capsule_on_disk_early') with ubman.log.section('Test Case 5-b, after reboot'): if not capsule_early: exec_manual_update(ubman, disk_img, capsule_files) check_file_removed(ubman, disk_img, capsule_files) verify_content(ubman, '100000', 'u-boot:Old') |