Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 | /* * (C) Copyright 2001 * Stuart Hughes <stuarth@lineo.com> * This file is based on similar values for other boards found in other * U-Boot config files, and some that I found in the mpc8260ads manual. * * Note: my board is a PILOT rev. * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address. * * (C) Copyright 2003 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2. * Ported to PQ2FADS-ZU board. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_MPC8260ADS 1 /* ...on motorola ads board */ /* ADS flavours */ #define CFG_8260ADS 1 /* MPC8260ADS */ #define CFG_8266ADS 2 /* MPC8266ADS */ #define CFG_PQ2FADS 3 /* PQ2FADS-ZU */ #ifndef CONFIG_ADSTYPE #define CONFIG_ADSTYPE CFG_8260ADS #endif /* CONFIG_ADSTYPE */ #define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ /* allow serial and ethaddr to be overwritten */ #define CONFIG_ENV_OVERWRITE /* * select serial console configuration * * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 * for SCC). * * if CONFIG_CONS_NONE is defined, then the serial console routines must * defined elsewhere (for example, on the cogent platform, there are serial * ports on the motherboard which are used for the serial console - see * cogent/cma101/serial.[ch]). */ #undef CONFIG_CONS_ON_SMC /* define if console on SMC */ #define CONFIG_CONS_ON_SCC /* define if console on SCC */ #undef CONFIG_CONS_NONE /* define if console on something else */ #define CONFIG_CONS_INDEX 1 /* which serial channel for console */ /* * select ethernet configuration * * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 * for FCC) * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be * defined elsewhere (as for the console), or CFG_CMD_NET must be removed * from CONFIG_COMMANDS to remove support for networking. */ #undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ #define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ #undef CONFIG_ETHER_NONE /* define if ether on something else */ #ifdef CONFIG_ETHER_ON_FCC #define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */ #if (CONFIG_ETHER_INDEX == 2) /* * - Rx-CLK is CLK13 * - Tx-CLK is CLK14 * - Select bus for bd/buffers (see 28-13) * - Full duplex */ # define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) # define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) # define CFG_CPMFCR_RAMTYPE 0 # define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) #endif /* CONFIG_ETHER_INDEX */ #define CONFIG_MII /* MII PHY management */ #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ /* * GPIO pins used for bit-banged MII communications */ #define MDIO_PORT 2 /* Port C */ #define MDIO_ACTIVE (iop->pdir |= 0x00400000) #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) #define MDIO_READ ((iop->pdat & 0x00400000) != 0) #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ else iop->pdat &= ~0x00400000 #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ else iop->pdat &= ~0x00200000 #define MIIDELAY udelay(1) #endif /* CONFIG_ETHER_ON_FCC */ #if CONFIG_ADSTYPE == CFG_PQ2FADS #undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */ #else #define CONFIG_HARD_I2C 1 /* To enable I2C support */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F #if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR) #define CONFIG_SPD_ADDR 0x50 #endif #endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ #ifndef CONFIG_SDRAM_PBI #define CONFIG_SDRAM_PBI 1 /* By default, use page-based interleaving */ #endif #ifndef CONFIG_8260_CLKIN #if CONFIG_ADSTYPE == CFG_PQ2FADS #define CONFIG_8260_CLKIN 100000000 /* in Hz */ #else #define CONFIG_8260_CLKIN 66666666 /* in Hz */ #endif #endif #define CONFIG_BAUDRATE 115200 #define CFG_EXCLUDE CFG_CMD_BEDBUG | \ CFG_CMD_BMP | \ CFG_CMD_BSP | \ CFG_CMD_DATE | \ CFG_CMD_DOC | \ CFG_CMD_DTT | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_FAT | \ CFG_CMD_FDC | \ CFG_CMD_FDOS | \ CFG_CMD_HWFLOW | \ CFG_CMD_IDE | \ CFG_CMD_KGDB | \ CFG_CMD_MMC | \ CFG_CMD_NAND | \ CFG_CMD_PCI | \ CFG_CMD_PCMCIA | \ CFG_CMD_SCSI | \ CFG_CMD_SPI | \ CFG_CMD_USB | \ CFG_CMD_VFD #if CONFIG_ADSTYPE == CFG_PQ2FADS #define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ CFG_CMD_SDRAM | \ CFG_CMD_I2C | \ CFG_EXCLUDE ) ) #else #define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \ CFG_EXCLUDE ) ) #endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram rw" #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ #define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ #undef CONFIG_KGDB_NONE /* define if kgdb on something else */ #define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ #endif #undef CONFIG_WATCHDOG /* disable platform specific watchdog */ /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #define CFG_FLASH_BASE 0xff800000 #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ #define CFG_FLASH_SIZE 8 #define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ #define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ #define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ #define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ #define CFG_JFFS2_FIRST_SECTOR 1 #define CFG_JFFS2_LAST_SECTOR 27 #define CFG_JFFS2_SORT_FRAGMENTS #define CFG_JFFS_CUSTOM_PART /* this is stuff came out of the Motorola docs */ #define CFG_DEFAULT_IMMR 0x0F010000 #define CFG_IMMR 0xF0000000 #define CFG_BCSR 0xF4500000 #define CFG_SDRAM_BASE 0x00000000 #define CFG_LSDRAM_BASE 0xD0000000 #define RS232EN_1 0x02000002 #define RS232EN_2 0x01000001 #define FETHIEN1 0x08000008 #define FETH1_RST 0x04000004 #define FETHIEN2 0x01000000 #define FETH2_RST 0x08000000 #define CFG_INIT_RAM_ADDR CFG_IMMR #define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */ #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /* 0x0EA28205 */ #define CFG_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\ ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 ) |\ ( HRCW_BMS | HRCW_APPC10 ) |\ ( HRCW_MODCK_H0101 ) \ ) /* no slaves */ #define CFG_HRCW_SLAVE1 0 #define CFG_HRCW_SLAVE2 0 #define CFG_HRCW_SLAVE3 0 #define CFG_HRCW_SLAVE4 0 #define CFG_HRCW_SLAVE5 0 #define CFG_HRCW_SLAVE6 0 #define CFG_HRCW_SLAVE7 0 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) # define CFG_RAMBOOT #endif #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #ifndef CFG_RAMBOOT # define CFG_ENV_IS_IN_FLASH 1 # define CFG_ENV_SECT_SIZE 0x40000 # define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE) #else # define CFG_ENV_IS_IN_NVRAM 1 # define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) # define CFG_ENV_SIZE 0x200 #endif /* CFG_RAMBOOT */ #define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif #define CFG_HID0_INIT 0 #define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) #define CFG_HID2 0 #define CFG_SYPCR 0xFFFFFFC3 #define CFG_BCR 0x100C0000 #define CFG_SIUMCR 0x0A200000 #define CFG_SCCR SCCR_DFBRG01 #define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801 #define CFG_OR0_PRELIM 0xFF800876 #define CFG_BR1_PRELIM CFG_BCSR | 0x00001801 #define CFG_OR1_PRELIM 0xFFFF8010 #define CFG_RMR RMR_CSRE #define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) #define CFG_RCCR 0 #if CONFIG_ADSTYPE == CFG_PQ2FADS #define CFG_PSDMR 0x824B36A3 #define CFG_PSRT 0x13 #define CFG_LSDMR 0x828737A3 #define CFG_LSRT 0x13 #define CFG_MPTPR 0x2800 #else #define CFG_PSDMR 0x016EB452 #define CFG_PSRT 0x21 #define CFG_LSDMR 0x0086A522 #define CFG_LSRT 0x21 #define CFG_MPTPR 0x1900 #endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */ #define CFG_RESET_ADDRESS 0x04400000 #endif /* __CONFIG_H */ |