U-Boot

// SPDX-License-Identifier: GPL-2.0
/*
 * Generic PCIE host provided by e.g. QEMU
 *
 * Heavily based on drivers/pci/pcie_xilinx.c
 *
 * Copyright (C) 2016 Imagination Technologies
 */

#include <dm.h>
#include <pci.h>
#include <linux/ioport.h>
#include <linux/printk.h>

#include <asm/io.h>

#define TYPE_PCI 0x1

/**
 * struct generic_ecam_pcie - generic_ecam PCIe controller state
 * @cfg_base: The base address of memory mapped configuration space
 */
struct generic_ecam_pcie {
	void *cfg_base;
	pci_size_t size;
	int first_busno;
};

/**
 * pci_generic_ecam_conf_address() - Calculate the address of a config access
 * @bus: Pointer to the PCI bus
 * @bdf: Identifies the PCIe device to access
 * @offset: The offset into the device's configuration space
 * @paddress: Pointer to the pointer to write the calculates address to
 *
 * Calculates the address that should be accessed to perform a PCIe
 * configuration space access for a given device identified by the PCIe
 * controller device @pcie and the bus, device & function numbers in @bdf. If
 * access to the device is not valid then the function will return an error
 * code. Otherwise the address to access will be written to the pointer pointed
 * to by @paddress.
 */
static int pci_generic_ecam_conf_address(const struct udevice *bus,
					 pci_dev_t bdf, uint offset,
					 void **paddress)
{
	struct generic_ecam_pcie *pcie = dev_get_priv(bus);
	void *addr;

	addr = pcie->cfg_base;

	if (dev_get_driver_data(bus) == TYPE_PCI) {
		addr += ((PCI_BUS(bdf) - pcie->first_busno) << 16) |
			 (PCI_DEV(bdf) << 11) | (PCI_FUNC(bdf) << 8) | offset;
	} else {
		addr += PCIE_ECAM_OFFSET(PCI_BUS(bdf) - pcie->first_busno,
					 PCI_DEV(bdf), PCI_FUNC(bdf), offset);
	}
	*paddress = addr;

	return 0;
}

static bool pci_generic_ecam_addr_valid(const struct udevice *bus,
					pci_dev_t bdf)
{
	struct generic_ecam_pcie *pcie = dev_get_priv(bus);
	int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16);

	return (PCI_BUS(bdf) >= pcie->first_busno &&
		PCI_BUS(bdf) < pcie->first_busno + num_buses);
}

/**
 * pci_generic_ecam_read_config() - Read from configuration space
 * @bus: Pointer to the PCI bus
 * @bdf: Identifies the PCIe device to access
 * @offset: The offset into the device's configuration space
 * @valuep: A pointer at which to store the read value
 * @size: Indicates the size of access to perform
 *
 * Read a value of size @size from offset @offset within the configuration
 * space of the device identified by the bus, device & function numbers in @bdf
 * on the PCI bus @bus.
 */
static int pci_generic_ecam_read_config(const struct udevice *bus,
					pci_dev_t bdf, uint offset,
					ulong *valuep, enum pci_size_t size)
{
	if (!pci_generic_ecam_addr_valid(bus, bdf)) {
		*valuep = pci_get_ff(size);
		return 0;
	}

	return pci_generic_mmap_read_config(bus, pci_generic_ecam_conf_address,
					    bdf, offset, valuep, size);
}

/**
 * pci_generic_ecam_write_config() - Write to configuration space
 * @bus: Pointer to the PCI bus
 * @bdf: Identifies the PCIe device to access
 * @offset: The offset into the device's configuration space
 * @value: The value to write
 * @size: Indicates the size of access to perform
 *
 * Write the value @value of size @size from offset @offset within the
 * configuration space of the device identified by the bus, device & function
 * numbers in @bdf on the PCI bus @bus.
 */
static int pci_generic_ecam_write_config(struct udevice *bus, pci_dev_t bdf,
				    uint offset, ulong value,
				    enum pci_size_t size)
{
	if (!pci_generic_ecam_addr_valid(bus, bdf))
		return 0;

	return pci_generic_mmap_write_config(bus, pci_generic_ecam_conf_address,
					     bdf, offset, value, size);
}

/**
 * pci_generic_ecam_of_to_plat() - Translate from DT to device state
 * @dev: A pointer to the device being operated on
 *
 * Translate relevant data from the device tree pertaining to device @dev into
 * state that the driver will later make use of. This state is stored in the
 * device's private data structure.
 *
 * Return: 0 on success, else -EINVAL
 */
static int pci_generic_ecam_of_to_plat(struct udevice *dev)
{
	struct generic_ecam_pcie *pcie = dev_get_priv(dev);
	ofnode node = dev_ofnode(dev);
	struct resource reg_res;
	int err;

	err = ofnode_read_resource(node, 0, &reg_res);
	if (err < 0) {
		pr_err("\"reg\" resource not found\n");
		return err;
	}

	pcie->size = resource_size(&reg_res);
	pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE);

	return 0;
}

static int pci_generic_ecam_probe(struct udevice *dev)
{
	struct generic_ecam_pcie *pcie = dev_get_priv(dev);

	pcie->first_busno = dev_seq(dev);

	return 0;
}

static const struct dm_pci_ops pci_generic_ecam_ops = {
	.read_config	= pci_generic_ecam_read_config,
	.write_config	= pci_generic_ecam_write_config,
};

static const struct udevice_id pci_generic_ecam_ids[] = {
	{ .compatible = "pci-host-ecam-generic" /* PCI-E */ },
	{ .compatible = "pci-host-cam-generic", .data = TYPE_PCI },
	{ }
};

U_BOOT_DRIVER(pci_generic_ecam) = {
	.name			= "pci_generic_ecam",
	.id			= UCLASS_PCI,
	.of_match		= pci_generic_ecam_ids,
	.ops			= &pci_generic_ecam_ops,
	.probe			= pci_generic_ecam_probe,
	.of_to_plat	= pci_generic_ecam_of_to_plat,
	.priv_auto	= sizeof(struct generic_ecam_pcie),
};