U-Boot

/*
 *
 * Most of this source has been derived from the Linux USB
 * project:
 * (C) Copyright Linus Torvalds 1999
 * (C) Copyright Johannes Erdfelt 1999-2001
 * (C) Copyright Andreas Gal 1999
 * (C) Copyright Gregory P. Smith 1999
 * (C) Copyright Deti Fliegl 1999 (new USB architecture)
 * (C) Copyright Randy Dunlap 2000
 * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id)
 * (C) Copyright Yggdrasil Computing, Inc. 2000
 *     (usb_device_id matching changes by Adam J. Richter)
 *
 * Adapted for U-Boot:
 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 */

/*
 * How it works:
 *
 * Since this is a bootloader, the devices will not be automatic
 * (re)configured on hotplug, but after a restart of the USB the
 * device should work.
 *
 * For each transfer (except "Interrupt") we wait for completion.
 */
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <linux/ctype.h>

#if defined(CONFIG_CMD_USB)

#include <usb.h>
#ifdef CONFIG_4xx
#include <405gp_pci.h>
#endif

#undef USB_DEBUG

#ifdef	USB_DEBUG
#define	USB_PRINTF(fmt,args...)	printf (fmt ,##args)
#else
#define USB_PRINTF(fmt,args...)
#endif

#define USB_BUFSIZ	512

static struct usb_device usb_dev[USB_MAX_DEVICE];
static int dev_index;
static int running;
static int asynch_allowed;
static struct devrequest setup_packet;

char usb_started; /* flag for the started/stopped USB status */

/**********************************************************************
 * some forward declerations...
 */
void usb_scan_devices(void);

int usb_hub_probe(struct usb_device *dev, int ifnum);
void usb_hub_reset(void);


/***********************************************************************
 * wait_ms
 */

void __inline__ wait_ms(unsigned long ms)
{
	while(ms-->0)
		udelay(1000);
}
/***************************************************************************
 * Init USB Device
 */

int usb_init(void)
{
	int result;

	running=0;
	dev_index=0;
	asynch_allowed=1;
	usb_hub_reset();
	/* init low_level USB */
	printf("USB:   ");
	result = usb_lowlevel_init();
	/* if lowlevel init is OK, scan the bus for devices i.e. search HUBs and configure them */
	if(result==0) {
		printf("scanning bus for devices... ");
		running=1;
		usb_scan_devices();
		usb_started = 1;
		return 0;
	}
	else {
		printf("Error, couldn't init Lowlevel part\n");
		usb_started = 0;
		return -1;
	}
}

/******************************************************************************
 * Stop USB this stops the LowLevel Part and deregisters USB devices.
 */
int usb_stop(void)
{
	asynch_allowed=1;
	usb_started = 0;
	usb_hub_reset();
	return usb_lowlevel_stop();
}

/*
 * disables the asynch behaviour of the control message. This is used for data
 * transfers that uses the exclusiv access to the control and bulk messages.
 */
void usb_disable_asynch(int disable)
{
	asynch_allowed=!disable;
}


/*-------------------------------------------------------------------
 * Message wrappers.
 *
 */

/*
 * submits an Interrupt Message
 */
int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
			void *buffer,int transfer_len, int interval)
{
	return submit_int_msg(dev,pipe,buffer,transfer_len,interval);
}

/*
 * submits a control message and waits for comletion (at least timeout * 1ms)
 * If timeout is 0, we don't wait for completion (used as example to set and
 * clear keyboards LEDs). For data transfers, (storage transfers) we don't
 * allow control messages with 0 timeout, by previousely resetting the flag
 * asynch_allowed (usb_disable_asynch(1)).
 * returns the transfered length if OK or -1 if error. The transfered length
 * and the current status are stored in the dev->act_len and dev->status.
 */
int usb_control_msg(struct usb_device *dev, unsigned int pipe,
			unsigned char request, unsigned char requesttype,
			unsigned short value, unsigned short index,
			void *data, unsigned short size, int timeout)
{
	if((timeout==0)&&(!asynch_allowed)) /* request for a asynch control pipe is not allowed */
		return -1;

	/* set setup command */
	setup_packet.requesttype = requesttype;
	setup_packet.request = request;
	setup_packet.value = swap_16(value);
	setup_packet.index = swap_16(index);
	setup_packet.length = swap_16(size);
 	USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X\nvalue 0x%X index 0x%X length 0x%X\n",
		request,requesttype,value,index,size);
	dev->status=USB_ST_NOT_PROC; /*not yet processed */

	submit_control_msg(dev,pipe,data,size,&setup_packet);
	if(timeout==0) {
		return (int)size;
	}
	while(timeout--) {
		if(!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
			break;
		wait_ms(1);
	}
	if(dev->status==0)
		return dev->act_len;
	else {
		return -1;
	}
}

/*-------------------------------------------------------------------
 * submits bulk message, and waits for completion. returns 0 if Ok or
 * -1 if Error.
 * synchronous behavior
 */
int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
			void *data, int len, int *actual_length, int timeout)
{
	if (len < 0)
		return -1;
	dev->status=USB_ST_NOT_PROC; /*not yet processed */
	submit_bulk_msg(dev,pipe,data,len);
	while(timeout--) {
		if(!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
			break;
		wait_ms(1);
	}
	*actual_length=dev->act_len;
	if(dev->status==0)
		return 0;
	else
		return -1;
}


/*-------------------------------------------------------------------
 * Max Packet stuff
 */

/*
 * returns the max packet size, depending on the pipe direction and
 * the configurations values
 */
int usb_maxpacket(struct usb_device *dev,unsigned long pipe)
{
	if((pipe & USB_DIR_IN)==0) /* direction is out -> use emaxpacket out */
		return(dev->epmaxpacketout[((pipe>>15) & 0xf)]);
	else
		return(dev->epmaxpacketin[((pipe>>15) & 0xf)]);
}

/*
 * set the max packed value of all endpoints in the given configuration
 */
int usb_set_maxpacket(struct usb_device *dev)
{
	int i,ii,b;
	struct usb_endpoint_descriptor *ep;

	for(i=0; i<dev->config.bNumInterfaces;i++) {
		for(ii=0; ii<dev->config.if_desc[i].bNumEndpoints; ii++) {
			ep=&dev->config.if_desc[i].ep_desc[ii];
			b=ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;

			if((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)==USB_ENDPOINT_XFER_CONTROL) {	/* Control => bidirectional */
				dev->epmaxpacketout[b] = ep->wMaxPacketSize;
				dev->epmaxpacketin [b] = ep->wMaxPacketSize;
				USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",b,dev->epmaxpacketin[b]);
			}
			else {
				if ((ep->bEndpointAddress & 0x80)==0) { /* OUT Endpoint */
					if(ep->wMaxPacketSize > dev->epmaxpacketout[b]) {
						dev->epmaxpacketout[b] = ep->wMaxPacketSize;
						USB_PRINTF("##EP epmaxpacketout[%d] = %d\n",b,dev->epmaxpacketout[b]);
					}
				}
				else  { /* IN Endpoint */
					if(ep->wMaxPacketSize > dev->epmaxpacketin[b]) {
						dev->epmaxpacketin[b] = ep->wMaxPacketSize;
						USB_PRINTF("##EP epmaxpacketin[%d] = %d\n",b,dev->epmaxpacketin[b]);
					}
				} /* if out */
			} /* if control */
		} /* for each endpoint */
	}
	return 0;
}

/*******************************************************************************
 * Parse the config, located in buffer, and fills the dev->config structure.
 * Note that all little/big endian swapping are done automatically.
 */
int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
{
	struct usb_descriptor_header *head;
	int index, ifno, epno, curr_if_num;
	int i;
	unsigned char *ch;

	ifno = -1;
	epno = -1;
	curr_if_num = -1;

	dev->configno = cfgno;
	head = (struct usb_descriptor_header *) &buffer[0];
	if(head->bDescriptorType != USB_DT_CONFIG) {
		printf(" ERROR: NOT USB_CONFIG_DESC %x\n", head->bDescriptorType);
		return -1;
	}
	memcpy(&dev->config, buffer, buffer[0]);
	dev->config.wTotalLength = swap_16(dev->config.wTotalLength);
	dev->config.no_of_if = 0;

	index = dev->config.bLength;
	/* Ok the first entry must be a configuration entry, now process the others */
	head = (struct usb_descriptor_header *) &buffer[index];
	while(index + 1 < dev->config.wTotalLength) {
		switch(head->bDescriptorType) {
			case USB_DT_INTERFACE:
				if(((struct usb_interface_descriptor *) &buffer[index])->
					bInterfaceNumber != curr_if_num) {
					/* this is a new interface, copy new desc */
					ifno = dev->config.no_of_if;
					dev->config.no_of_if++;
					memcpy(&dev->config.if_desc[ifno],
						&buffer[index], buffer[index]);
					dev->config.if_desc[ifno].no_of_ep = 0;
					dev->config.if_desc[ifno].num_altsetting = 1;
					curr_if_num = dev->config.if_desc[ifno].bInterfaceNumber;
				} else {
					/* found alternate setting for the interface */
					dev->config.if_desc[ifno].num_altsetting++;
				}
				break;
			case USB_DT_ENDPOINT:
				epno = dev->config.if_desc[ifno].no_of_ep;
				dev->config.if_desc[ifno].no_of_ep++; /* found an endpoint */
				memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
					&buffer[index], buffer[index]);
				dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize =
					swap_16(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize);
				USB_PRINTF("if %d, ep %d\n", ifno, epno);
				break;
			default:
				if(head->bLength == 0)
					return 1;
				USB_PRINTF("unknown Description Type : %x\n", head->bDescriptorType);
				{
					ch = (unsigned char *)head;
					for(i = 0; i < head->bLength; i++)
						USB_PRINTF("%02X ", *ch++);
					USB_PRINTF("\n\n\n");
				}
				break;
		}
		index += head->bLength;
		head = (struct usb_descriptor_header *)&buffer[index];
	}
	return 1;
}

/***********************************************************************
 * Clears an endpoint
 * endp: endpoint number in bits 0-3;
 * direction flag in bit 7 (1 = IN, 0 = OUT)
 */
int usb_clear_halt(struct usb_device *dev, int pipe)
{
	int result;
	int endp = usb_pipeendpoint(pipe)|(usb_pipein(pipe)<<7);

	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
		USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0, endp, NULL, 0, USB_CNTL_TIMEOUT * 3);

	/* don't clear if failed */
	if (result < 0)
		return result;

	/*
	 * NOTE: we do not get status and verify reset was successful
	 * as some devices are reported to lock up upon this check..
	 */

	usb_endpoint_running(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));

	/* toggle is reset on clear */
	usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
	return 0;
}


/**********************************************************************
 * get_descriptor type
 */
int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char index, void *buf, int size)
{
	int res;
 	res = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
			(type << 8) + index, 0,
			buf, size, USB_CNTL_TIMEOUT);
	return res;
}

/**********************************************************************
 * gets configuration cfgno and store it in the buffer
 */
int usb_get_configuration_no(struct usb_device *dev,unsigned char *buffer,int cfgno)
{
 	int result;
	unsigned int tmp;
	struct usb_config_descriptor *config;


	config=(struct usb_config_descriptor *)&buffer[0];
	result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 8);
	if (result < 8) {
		if (result < 0)
			printf("unable to get descriptor, error %lX\n",dev->status);
		else
			printf("config descriptor too short (expected %i, got %i)\n",8,result);
		return -1;
	}
	tmp=swap_16(config->wTotalLength);

	if (tmp > USB_BUFSIZ) {
		USB_PRINTF("usb_get_configuration_no: failed to get descriptor - too long: %d\n",
			tmp);
		return -1;
	}

	result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp);
	USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",cfgno,result,tmp);
	return result;
}

/********************************************************************
 * set address of a device to the value in dev->devnum.
 * This can only be done by addressing the device via the default address (0)
 */
int usb_set_address(struct usb_device *dev)
{
	int res;

	USB_PRINTF("set address %d\n",dev->devnum);
	res=usb_control_msg(dev, usb_snddefctrl(dev),
		USB_REQ_SET_ADDRESS, 0,
		(dev->devnum),0,
		NULL,0, USB_CNTL_TIMEOUT);
	return res;
}

/********************************************************************
 * set interface number to interface
 */
int usb_set_interface(struct usb_device *dev, int interface, int alternate)
{
	struct usb_interface_descriptor *if_face = NULL;
	int ret, i;

	for (i = 0; i < dev->config.bNumInterfaces; i++) {
		if (dev->config.if_desc[i].bInterfaceNumber == interface) {
			if_face = &dev->config.if_desc[i];
			break;
		}
	}
	if (!if_face) {
		printf("selecting invalid interface %d", interface);
		return -1;
	}
	/*
	 * We should return now for devices with only one alternate setting.
	 * According to 9.4.10 of the Universal Serial Bus Specification Revision 2.0
	 * such devices can return with a STALL. This results in some USB sticks
	 * timeouting during initialization and then being unusable in U-Boot.
	 */
	if (if_face->num_altsetting == 1)
		return 0;

	if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
	    USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, alternate,
	    interface, NULL, 0, USB_CNTL_TIMEOUT * 5)) < 0)
		return ret;

	return 0;
}

/********************************************************************
 * set configuration number to configuration
 */
int usb_set_configuration(struct usb_device *dev, int configuration)
{
	int res;
	USB_PRINTF("set configuration %d\n",configuration);
	/* set setup command */
	res=usb_control_msg(dev, usb_sndctrlpipe(dev,0),
		USB_REQ_SET_CONFIGURATION, 0,
		configuration,0,
		NULL,0, USB_CNTL_TIMEOUT);
	if(res==0) {
		dev->toggle[0] = 0;
		dev->toggle[1] = 0;
		return 0;
	}
	else
		return -1;
}

/********************************************************************
 * set protocol to protocol
 */
int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol)
{
	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
		USB_REQ_SET_PROTOCOL, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
		protocol, ifnum, NULL, 0, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * set idle
 */
int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id)
{
	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
		USB_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
		(duration << 8) | report_id, ifnum, NULL, 0, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * get report
 */
int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type, unsigned char id, void *buf, int size)
{
	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
		USB_REQ_GET_REPORT, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
		(type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * get class descriptor
 */
int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
		unsigned char type, unsigned char id, void *buf, int size)
{
	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
		USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
		(type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * get string index in buffer
 */
int usb_get_string(struct usb_device *dev, unsigned short langid, unsigned char index, void *buf, int size)
{
	int i;
	int result;

	for (i = 0; i < 3; ++i) {
		/* some devices are flaky */
		result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
			USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
			(USB_DT_STRING << 8) + index, langid, buf, size,
			USB_CNTL_TIMEOUT);

		if (result > 0)
			break;
	}

	return result;
}


static void usb_try_string_workarounds(unsigned char *buf, int *length)
{
	int newlength, oldlength = *length;

	for (newlength = 2; newlength + 1 < oldlength; newlength += 2)
		if (!isprint(buf[newlength]) || buf[newlength + 1])
			break;

	if (newlength > 2) {
		buf[0] = newlength;
		*length = newlength;
	}
}


static int usb_string_sub(struct usb_device *dev, unsigned int langid,
		unsigned int index, unsigned char *buf)
{
	int rc;

	/* Try to read the string descriptor by asking for the maximum
	 * possible number of bytes */
	rc = usb_get_string(dev, langid, index, buf, 255);

	/* If that failed try to read the descriptor length, then
	 * ask for just that many bytes */
	if (rc < 2) {
		rc = usb_get_string(dev, langid, index, buf, 2);
		if (rc == 2)
			rc = usb_get_string(dev, langid, index, buf, buf[0]);
	}

	if (rc >= 2) {
		if (!buf[0] && !buf[1])
			usb_try_string_workarounds(buf, &rc);

		/* There might be extra junk at the end of the descriptor */
		if (buf[0] < rc)
			rc = buf[0];

		rc = rc - (rc & 1); /* force a multiple of two */
	}

	if (rc < 2)
		rc = -1;

	return rc;
}


/********************************************************************
 * usb_string:
 * Get string index and translate it to ascii.
 * returns string length (> 0) or error (< 0)
 */
int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
{
	unsigned char mybuf[USB_BUFSIZ];
	unsigned char *tbuf;
	int err;
	unsigned int u, idx;

	if (size <= 0 || !buf || !index)
		return -1;
	buf[0] = 0;
	tbuf=&mybuf[0];

	/* get langid for strings if it's not yet known */
	if (!dev->have_langid) {
		err = usb_string_sub(dev, 0, 0, tbuf);
		if (err < 0) {
			USB_PRINTF("error getting string descriptor 0 (error=%x)\n",dev->status);
			return -1;
		} else if (tbuf[0] < 4) {
			USB_PRINTF("string descriptor 0 too short\n");
			return -1;
		} else {
			dev->have_langid = -1;
			dev->string_langid = tbuf[2] | (tbuf[3]<< 8);
				/* always use the first langid listed */
			USB_PRINTF("USB device number %d default language ID 0x%x\n",
				dev->devnum, dev->string_langid);
		}
	}

	err = usb_string_sub(dev, dev->string_langid, index, tbuf);
	if (err < 0)
		return err;

	size--;		/* leave room for trailing NULL char in output buffer */
	for (idx = 0, u = 2; u < err; u += 2) {
		if (idx >= size)
			break;
		if (tbuf[u+1])			/* high byte */
			buf[idx++] = '?';  /* non-ASCII character */
		else
			buf[idx++] = tbuf[u];
	}
	buf[idx] = 0;
	err = idx;
	return err;
}


/********************************************************************
 * USB device handling:
 * the USB device are static allocated [USB_MAX_DEVICE].
 */


/* returns a pointer to the device with the index [index].
 * if the device is not assigned (dev->devnum==-1) returns NULL
 */
struct usb_device * usb_get_dev_index(int index)
{
	if(usb_dev[index].devnum==-1)
		return NULL;
	else
		return &usb_dev[index];
}


/* returns a pointer of a new device structure or NULL, if
 * no device struct is available
 */
struct usb_device * usb_alloc_new_device(void)
{
	int i;
	USB_PRINTF("New Device %d\n",dev_index);
	if(dev_index==USB_MAX_DEVICE) {
		printf("ERROR, too many USB Devices, max=%d\n",USB_MAX_DEVICE);
		return NULL;
	}
	usb_dev[dev_index].devnum=dev_index+1; /* default Address is 0, real addresses start with 1 */
	usb_dev[dev_index].maxchild=0;
	for(i=0;i<USB_MAXCHILDREN;i++)
		usb_dev[dev_index].children[i]=NULL;
	usb_dev[dev_index].parent=NULL;
	dev_index++;
	return &usb_dev[dev_index-1];
}


/*
 * By the time we get here, the device has gotten a new device ID
 * and is in the default state. We need to identify the thing and
 * get the ball rolling..
 *
 * Returns 0 for success, != 0 for error.
 */
int usb_new_device(struct usb_device *dev)
{
	int addr, err;
	int tmp;
	unsigned char tmpbuf[USB_BUFSIZ];

	dev->descriptor.bMaxPacketSize0 = 8;  /* Start off at 8 bytes  */
	dev->maxpacketsize = 0;		/* Default to 8 byte max packet size */
	dev->epmaxpacketin [0] = 8;
	dev->epmaxpacketout[0] = 8;

	/* We still haven't set the Address yet */
	addr = dev->devnum;
	dev->devnum = 0;

#undef NEW_INIT_SEQ
#ifdef NEW_INIT_SEQ
	/* this is a Windows scheme of initialization sequence, with double
	 * reset of the device. Some equipment is said to work only with such
	 * init sequence; this patch is based on the work by Alan Stern:
	 * http://sourceforge.net/mailarchive/forum.php?thread_id=5729457&forum_id=5398
	 */
	int j;
	struct usb_device_descriptor *desc;
	int port = -1;
	struct usb_device *parent = dev->parent;
	unsigned short portstatus;

	/* send 64-byte GET-DEVICE-DESCRIPTOR request.  Since the descriptor is
	 * only 18 bytes long, this will terminate with a short packet.  But if
	 * the maxpacket size is 8 or 16 the device may be waiting to transmit
	 * some more. */

	desc = (struct usb_device_descriptor *)tmpbuf;
	desc->bMaxPacketSize0 = 0;
	for (j = 0; j < 3; ++j) {
		err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
		if (err < 0) {
			USB_PRINTF("usb_new_device: 64 byte descr\n");
			break;
		}
	}
	dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;

	/* find the port number we're at */
	if (parent) {

		for (j = 0; j < parent->maxchild; j++) {
			if (parent->children[j] == dev) {
				port = j;
				break;
			}
		}
		if (port < 0) {
			printf("usb_new_device: cannot locate device's port..\n");
			return 1;
		}

		/* reset the port for the second time */
		err = hub_port_reset(dev->parent, port, &portstatus);
		if (err < 0) {
			printf("\n     Couldn't reset port %i\n", port);
			return 1;
		}
	}
#else
	/* and this is the old and known way of initializing devices */
	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8);
	if (err < 8) {
		printf("\n      USB device not responding, giving up (status=%lX)\n",dev->status);
		return 1;
	}
#endif

	dev->epmaxpacketin [0] = dev->descriptor.bMaxPacketSize0;
	dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
	switch (dev->descriptor.bMaxPacketSize0) {
		case 8: dev->maxpacketsize = 0; break;
		case 16: dev->maxpacketsize = 1; break;
		case 32: dev->maxpacketsize = 2; break;
		case 64: dev->maxpacketsize = 3; break;
	}
	dev->devnum = addr;

	err = usb_set_address(dev); /* set address */

	if (err < 0) {
		printf("\n      USB device not accepting new address (error=%lX)\n", dev->status);
		return 1;
	}

	wait_ms(10);	/* Let the SET_ADDRESS settle */

	tmp = sizeof(dev->descriptor);

	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, sizeof(dev->descriptor));
	if (err < tmp) {
		if (err < 0)
			printf("unable to get device descriptor (error=%d)\n",err);
		else
			printf("USB device descriptor short read (expected %i, got %i)\n",tmp,err);
		return 1;
	}
	/* correct le values */
	dev->descriptor.bcdUSB=swap_16(dev->descriptor.bcdUSB);
	dev->descriptor.idVendor=swap_16(dev->descriptor.idVendor);
	dev->descriptor.idProduct=swap_16(dev->descriptor.idProduct);
	dev->descriptor.bcdDevice=swap_16(dev->descriptor.bcdDevice);
	/* only support for one config for now */
	usb_get_configuration_no(dev,&tmpbuf[0],0);
	usb_parse_config(dev,&tmpbuf[0],0);
	usb_set_maxpacket(dev);
	/* we set the default configuration here */
	if (usb_set_configuration(dev, dev->config.bConfigurationValue)) {
		printf("failed to set default configuration len %d, status %lX\n",dev->act_len,dev->status);
		return -1;
	}
	USB_PRINTF("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
		dev->descriptor.iManufacturer, dev->descriptor.iProduct, dev->descriptor.iSerialNumber);
	memset(dev->mf, 0, sizeof(dev->mf));
	memset(dev->prod, 0, sizeof(dev->prod));
	memset(dev->serial, 0, sizeof(dev->serial));
	if (dev->descriptor.iManufacturer)
		usb_string(dev, dev->descriptor.iManufacturer, dev->mf, sizeof(dev->mf));
	if (dev->descriptor.iProduct)
		usb_string(dev, dev->descriptor.iProduct, dev->prod, sizeof(dev->prod));
	if (dev->descriptor.iSerialNumber)
		usb_string(dev, dev->descriptor.iSerialNumber, dev->serial, sizeof(dev->serial));
	USB_PRINTF("Manufacturer %s\n", dev->mf);
	USB_PRINTF("Product      %s\n", dev->prod);
	USB_PRINTF("SerialNumber %s\n", dev->serial);
	/* now prode if the device is a hub */
	usb_hub_probe(dev,0);
	return 0;
}

/* build device Tree  */
void usb_scan_devices(void)
{
	int i;
	struct usb_device *dev;

	/* first make all devices unknown */
	for(i=0;i<USB_MAX_DEVICE;i++) {
		memset(&usb_dev[i],0,sizeof(struct usb_device));
		usb_dev[i].devnum=-1;
	}
	dev_index=0;
	/* device 0 is always present (root hub, so let it analyze) */
	dev=usb_alloc_new_device();
	usb_new_device(dev);
	printf("%d USB Device(s) found\n",dev_index);
	/* insert "driver" if possible */
#ifdef CONFIG_USB_KEYBOARD
	drv_usb_kbd_init();
	USB_PRINTF("scan end\n");
#endif
}


/****************************************************************************
 * HUB "Driver"
 * Probes device for being a hub and configurate it
 */

#undef	USB_HUB_DEBUG

#ifdef	USB_HUB_DEBUG
#define	USB_HUB_PRINTF(fmt,args...)	printf (fmt ,##args)
#else
#define USB_HUB_PRINTF(fmt,args...)
#endif


static struct usb_hub_device hub_dev[USB_MAX_HUB];
static int usb_hub_index;


int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
{
	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
		USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
		USB_DT_HUB << 8, 0, data, size, USB_CNTL_TIMEOUT);
}

int usb_clear_hub_feature(struct usb_device *dev, int feature)
{
	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
		USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature, 0, NULL, 0, USB_CNTL_TIMEOUT);
}

int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
{
	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
		USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT);
}

int usb_set_port_feature(struct usb_device *dev, int port, int feature)
{
	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
		USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port, NULL, 0, USB_CNTL_TIMEOUT);
}

int usb_get_hub_status(struct usb_device *dev, void *data)
{
	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
			data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
}

int usb_get_port_status(struct usb_device *dev, int port, void *data)
{
	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
			data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
}


static void usb_hub_power_on(struct usb_hub_device *hub)
{
	int i;
	struct usb_device *dev;

	dev=hub->pusb_dev;
	/* Enable power to the ports */
	USB_HUB_PRINTF("enabling power on all ports\n");
	for (i = 0; i < dev->maxchild; i++) {
		usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
		USB_HUB_PRINTF("port %d returns %lX\n",i+1,dev->status);
		wait_ms(hub->desc.bPwrOn2PwrGood * 2);
	}
}

void usb_hub_reset(void)
{
	usb_hub_index=0;
}

struct usb_hub_device *usb_hub_allocate(void)
{
	if(usb_hub_index<USB_MAX_HUB) {
		return &hub_dev[usb_hub_index++];
	}
	printf("ERROR: USB_MAX_HUB (%d) reached\n",USB_MAX_HUB);
	return NULL;
}

#define MAX_TRIES 5

static int hub_port_reset(struct usb_device *dev, int port,
			unsigned short *portstat)
{
	int tries;
	struct usb_port_status portsts;
	unsigned short portstatus, portchange;


	USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port);
	for(tries=0;tries<MAX_TRIES;tries++) {

		usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
		wait_ms(200);

		if (usb_get_port_status(dev, port + 1, &portsts)<0) {
			USB_HUB_PRINTF("get_port_status failed status %lX\n",dev->status);
			return -1;
		}
		portstatus = swap_16(portsts.wPortStatus);
		portchange = swap_16(portsts.wPortChange);
		USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus ,portchange,
			portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");
		USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d  USB_PORT_STAT_ENABLE %d\n",
			(portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
			(portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
			(portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
		if ((portchange & USB_PORT_STAT_C_CONNECTION) ||
		    !(portstatus & USB_PORT_STAT_CONNECTION))
			return -1;

		if (portstatus & USB_PORT_STAT_ENABLE) {

			break;
		}

		wait_ms(200);
	}

	if (tries==MAX_TRIES) {
		USB_HUB_PRINTF("Cannot enable port %i after %i retries, disabling port.\n", port+1, MAX_TRIES);
		USB_HUB_PRINTF("Maybe the USB cable is bad?\n");
		return -1;
	}

	usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
	*portstat = portstatus;
	return 0;

}


void usb_hub_port_connect_change(struct usb_device *dev, int port)
{
	struct usb_device *usb;
	struct usb_port_status portsts;
	unsigned short portstatus, portchange;

	/* Check status */
	if (usb_get_port_status(dev, port + 1, &portsts)<0) {
		USB_HUB_PRINTF("get_port_status failed\n");
		return;
	}

	portstatus = swap_16(portsts.wPortStatus);
	portchange = swap_16(portsts.wPortChange);
	USB_HUB_PRINTF("portstatus %x, change %x, %s\n", portstatus, portchange,
		portstatus&(1<<USB_PORT_FEAT_LOWSPEED) ? "Low Speed" : "High Speed");

	/* Clear the connection change status */
	usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);

	/* Disconnect any existing devices under this port */
	if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
	     (!(portstatus & USB_PORT_STAT_ENABLE)))|| (dev->children[port])) {
		USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n");
		/* Return now if nothing is connected */
		if (!(portstatus & USB_PORT_STAT_CONNECTION))
			return;
	}
	wait_ms(200);

	/* Reset the port */
	if (hub_port_reset(dev, port, &portstatus) < 0) {
		printf("cannot reset port %i!?\n", port + 1);
		return;
	}

	wait_ms(200);

	/* Allocate a new device struct for it */
	usb=usb_alloc_new_device();
	usb->slow = (portstatus & USB_PORT_STAT_LOW_SPEED) ? 1 : 0;

	dev->children[port] = usb;
	usb->parent=dev;
	/* Run it through the hoops (find a driver, etc) */
	if (usb_new_device(usb)) {
		/* Woops, disable the port */
		USB_HUB_PRINTF("hub: disabling port %d\n", port + 1);
		usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
	}
}


int usb_hub_configure(struct usb_device *dev)
{
	unsigned char buffer[USB_BUFSIZ], *bitmap;
	struct usb_hub_descriptor *descriptor;
	struct usb_hub_status *hubsts;
	int i;
	struct usb_hub_device *hub;

	/* "allocate" Hub device */
	hub=usb_hub_allocate();
	if(hub==NULL)
		return -1;
	hub->pusb_dev=dev;
	/* Get the the hub descriptor */
	if (usb_get_hub_descriptor(dev, buffer, 4) < 0) {
		USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor, giving up %lX\n",dev->status);
		return -1;
	}
	descriptor = (struct usb_hub_descriptor *)buffer;

	/* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */
	i = descriptor->bLength;
	if (i > USB_BUFSIZ) {
		USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor - too long: %d\N",
			descriptor->bLength);
		return -1;
	}

	if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) {
		USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor 2nd giving up %lX\n",dev->status);
		return -1;
	}
	memcpy((unsigned char *)&hub->desc,buffer,descriptor->bLength);
	/* adjust 16bit values */
	hub->desc.wHubCharacteristics=swap_16(descriptor->wHubCharacteristics);
	/* set the bitmap */
	bitmap=(unsigned char *)&hub->desc.DeviceRemovable[0];
	memset(bitmap,0xff,(USB_MAXCHILDREN+1+7)/8); /* devices not removable by default */
	bitmap=(unsigned char *)&hub->desc.PortPowerCtrlMask[0];
	memset(bitmap,0xff,(USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
	for(i=0;i<((hub->desc.bNbrPorts + 1 + 7)/8);i++) {
		hub->desc.DeviceRemovable[i]=descriptor->DeviceRemovable[i];
	}
	for(i=0;i<((hub->desc.bNbrPorts + 1 + 7)/8);i++) {
		hub->desc.DeviceRemovable[i]=descriptor->PortPowerCtrlMask[i];
	}
	dev->maxchild = descriptor->bNbrPorts;
	USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);

	switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
		case 0x00:
			USB_HUB_PRINTF("ganged power switching\n");
			break;
		case 0x01:
			USB_HUB_PRINTF("individual port power switching\n");
			break;
		case 0x02:
		case 0x03:
			USB_HUB_PRINTF("unknown reserved power switching mode\n");
			break;
	}

	if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
		USB_HUB_PRINTF("part of a compound device\n");
	else
		USB_HUB_PRINTF("standalone hub\n");

	switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
		case 0x00:
			USB_HUB_PRINTF("global over-current protection\n");
			break;
		case 0x08:
			USB_HUB_PRINTF("individual port over-current protection\n");
			break;
		case 0x10:
		case 0x18:
			USB_HUB_PRINTF("no over-current protection\n");
      break;
	}
	USB_HUB_PRINTF("power on to power good time: %dms\n", descriptor->bPwrOn2PwrGood * 2);
	USB_HUB_PRINTF("hub controller current requirement: %dmA\n", descriptor->bHubContrCurrent);
	for (i = 0; i < dev->maxchild; i++)
		USB_HUB_PRINTF("port %d is%s removable\n", i + 1,
			hub->desc.DeviceRemovable[(i + 1)/8] & (1 << ((i + 1)%8)) ? " not" : "");
	if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
		USB_HUB_PRINTF("usb_hub_configure: failed to get Status - too long: %d\n",
			descriptor->bLength);
		return -1;
	}

	if (usb_get_hub_status(dev, buffer) < 0) {
		USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n",dev->status);
		return -1;
	}
	hubsts = (struct usb_hub_status *)buffer;
	USB_HUB_PRINTF("get_hub_status returned status %X, change %X\n",
		swap_16(hubsts->wHubStatus),swap_16(hubsts->wHubChange));
	USB_HUB_PRINTF("local power source is %s\n",
		(swap_16(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? "lost (inactive)" : "good");
	USB_HUB_PRINTF("%sover-current condition exists\n",
		(swap_16(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? "" : "no ");
	usb_hub_power_on(hub);
	for (i = 0; i < dev->maxchild; i++) {
		struct usb_port_status portsts;
		unsigned short portstatus, portchange;

		if (usb_get_port_status(dev, i + 1, &portsts) < 0) {
			USB_HUB_PRINTF("get_port_status failed\n");
			continue;
		}
		portstatus = swap_16(portsts.wPortStatus);
		portchange = swap_16(portsts.wPortChange);
		USB_HUB_PRINTF("Port %d Status %X Change %X\n",i+1,portstatus,portchange);
		if (portchange & USB_PORT_STAT_C_CONNECTION) {
			USB_HUB_PRINTF("port %d connection change\n", i + 1);
			usb_hub_port_connect_change(dev, i);
		}
		if (portchange & USB_PORT_STAT_C_ENABLE) {
			USB_HUB_PRINTF("port %d enable change, status %x\n", i + 1, portstatus);
			usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE);

			/* EM interference sometimes causes bad shielded USB devices to
			 * be shutdown by the hub, this hack enables them again.
			 * Works at least with mouse driver */
			if (!(portstatus & USB_PORT_STAT_ENABLE) &&
				(portstatus & USB_PORT_STAT_CONNECTION) && (dev->children[i])) {
				USB_HUB_PRINTF("already running port %i disabled by hub (EMI?), re-enabling...\n",
					i + 1);
					usb_hub_port_connect_change(dev, i);
			}
		}
		if (portstatus & USB_PORT_STAT_SUSPEND) {
			USB_HUB_PRINTF("port %d suspend change\n", i + 1);
			usb_clear_port_feature(dev, i + 1,  USB_PORT_FEAT_SUSPEND);
		}

		if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
			USB_HUB_PRINTF("port %d over-current change\n", i + 1);
			usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_OVER_CURRENT);
			usb_hub_power_on(hub);
		}

		if (portchange & USB_PORT_STAT_C_RESET) {
			USB_HUB_PRINTF("port %d reset change\n", i + 1);
			usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET);
		}
	} /* end for i all ports */

	return 0;
}

int usb_hub_probe(struct usb_device *dev, int ifnum)
{
	struct usb_interface_descriptor *iface;
	struct usb_endpoint_descriptor *ep;
	int ret;

	iface = &dev->config.if_desc[ifnum];
	/* Is it a hub? */
	if (iface->bInterfaceClass != USB_CLASS_HUB)
		return 0;
	/* Some hubs have a subclass of 1, which AFAICT according to the */
	/*  specs is not defined, but it works */
	if ((iface->bInterfaceSubClass != 0) &&
	    (iface->bInterfaceSubClass != 1))
		return 0;
	/* Multiple endpoints? What kind of mutant ninja-hub is this? */
	if (iface->bNumEndpoints != 1)
		return 0;
	ep = &iface->ep_desc[0];
	/* Output endpoint? Curiousier and curiousier.. */
	if (!(ep->bEndpointAddress & USB_DIR_IN))
		return 0;
	/* If it's not an interrupt endpoint, we'd better punt! */
	if ((ep->bmAttributes & 3) != 3)
		return 0;
	/* We found a hub */
	USB_HUB_PRINTF("USB hub found\n");
	ret=usb_hub_configure(dev);
	return ret;
}

#endif

/* EOF */