Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 | /* * (C) Copyright 2001 * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. * * Modified during 2003 by * Ken Chou, kchou@ieee.org * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <mpc824x.h> #include <pci.h> int checkboard (void) { ulong busfreq = get_bus_freq(0); char buf[32]; printf("Board: A3000 Local Bus at %s MHz\n", strmhz(buf, busfreq)); return 0; } long int initdram (int board_type) { long size; long new_bank0_end; long mear1; long emear1; size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); new_bank0_end = size - 1; mear1 = mpc824x_mpc107_getreg(MEAR1); emear1 = mpc824x_mpc107_getreg(EMEAR1); mear1 = (mear1 & 0xFFFFFF00) | ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); emear1 = (emear1 & 0xFFFFFF00) | ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); mpc824x_mpc107_setreg(MEAR1, mear1); mpc824x_mpc107_setreg(EMEAR1, emear1); return (size); } /* * Initialize PCI Devices */ #ifndef CONFIG_PCI_PNP static struct pci_config_table pci_a3000_config_table[] = { /* vendor, device, class */ /* bus, dev, func */ { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, /* dp83815 eth0 divice */ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, PCI_ENET0_MEMADDR, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x14, PCI_ANY_ID, /* PCI slot1 */ pci_cfgfunc_config_device, { PCI_ENET1_IOADDR, PCI_ENET1_MEMADDR, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */ pci_cfgfunc_config_device, { PCI_ENET2_IOADDR, PCI_ENET2_MEMADDR, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x16, PCI_ANY_ID, /* PCI slot3 */ pci_cfgfunc_config_device, { PCI_ENET3_IOADDR, PCI_ENET3_MEMADDR, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }}, { } }; #endif struct pci_controller hose = { #ifndef CONFIG_PCI_PNP config_table: pci_a3000_config_table, #endif }; void pci_init_board(void) { pci_mpc824x_init(&hose); } |