Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 | /* * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. * (C) Copyright 2007 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * CPU specific code for the MPC512x family. * * Derived from the MPC83xx code. */ #include <common.h> #include <command.h> #include <mpc512x.h> #include <asm/processor.h> #if defined(CONFIG_OF_LIBFDT) #include <fdt_support.h> #endif DECLARE_GLOBAL_DATA_PTR; int checkcpu (void) { volatile immap_t *immr = (immap_t *) CFG_IMMR; ulong clock = gd->cpu_clk; u32 pvr = get_pvr (); u32 spridr = immr->sysconf.spridr; char buf[32]; puts ("CPU: "); switch (spridr & 0xffff0000) { case SPR_5121E: puts ("MPC5121e "); break; default: printf ("Unknown part ID %08x ", spridr & 0xffff0000); } printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr)); switch (pvr & 0xffff0000) { case PVR_E300C4: puts ("e300c4 "); break; default: puts ("unknown "); } printf ("at %s MHz, CSB at %3d MHz\n", strmhz(buf, clock), gd->csb_clk / 1000000); return 0; } int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { ulong msr; volatile immap_t *immap = (immap_t *) CFG_IMMR; /* Interrupts and MMU off */ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); msr &= ~( MSR_EE | MSR_IR | MSR_DR); __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); /* * Enable Reset Control Reg - "RSTE" is the magic word that let us go */ immap->reset.rpr = 0x52535445; /* Verify Reset Control Reg is enabled */ while (!((immap->reset.rcer) & RCER_CRE)) ; printf ("Resetting the board.\n"); udelay(200); /* Perform reset */ immap->reset.rcr = RCR_SWHR; /* Unreached... */ return 1; } /* * Get timebase clock frequency (like cpu_clk in Hz) */ unsigned long get_tbclk (void) { ulong tbclk; tbclk = (gd->bus_clk + 3L) / 4L; return tbclk; } #if defined(CONFIG_WATCHDOG) void watchdog_reset (void) { int re_enable = disable_interrupts (); /* Reset watchdog */ volatile immap_t *immr = (immap_t *) CFG_IMMR; immr->wdt.swsrr = 0x556c; immr->wdt.swsrr = 0xaa39; if (re_enable) enable_interrupts (); } #endif #ifdef CONFIG_OF_LIBFDT void ft_cpu_setup(void *blob, bd_t *bd) { char * cpu_path = "/cpus/" OF_CPU; char * eth_path = "/" OF_SOC "/ethernet@2800"; do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1); do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1); do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1); do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipsfreq, 1); do_fixup_by_path(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0); /* this is so old kernels with old device trees will boot */ do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0); } #endif |