Open Menu / board / mpr2 / lowlevel_init.S
Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
/*
 * (C) Copyright 2008
 * Mark Jonas <mark.jonas@de.bosch.com>
 *
 * (C) Copyright 2007
 * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
 *
 * board/mpr2/lowlevel_init.S
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

	.global	lowlevel_init

	.text
	.align	2

lowlevel_init:

/*
 * Set frequency multipliers and dividers in FRQCR.
 */
	mov.l	WTCSR_A,r1
	mov.l	WTCSR_D,r0
	mov.w	r0,@r1

	mov.l	WTCNT_A,r1
	mov.l	WTCNT_D,r0
	mov.w	r0,@r1

	mov.l	FRQCR_A,r1
	mov.l	FRQCR_D,r0
	mov.w	r0,@r1

/*
 * Setup CS0 (Flash).
 */
	mov.l	CS0BCR_A, r1
	mov.l	CS0BCR_D, r0
	mov.l	r0, @r1

	mov.l	CS0WCR_A, r1
	mov.l	CS0WCR_D, r0
	mov.l	r0, @r1

/*
 * Setup CS3 (SDRAM).
 */
	mov.l	CS3BCR_A, r1
	mov.l	CS3BCR_D, r0
	mov.l	r0, @r1

	mov.l	CS3WCR_A, r1
	mov.l	CS3WCR_D, r0
	mov.l	r0, @r1

	mov.l	SDCR_A, r1
	mov.l	SDCR_D1, r0
	mov.l	r0, @r1

	mov.l	RTCSR_A, r1
	mov.l	RTCSR_D, r0
	mov.l	r0, @r1

	mov.l	RTCNT_A, r1
	mov.l	RTCNT_D, r0
	mov.l	r0, @r1

	mov.l	RTCOR_A, r1
	mov.l	RTCOR_D, r0
	mov.l	r0, @r1

	mov.l	SDCR_A, r1
	mov.l	SDCR_D2, r0
	mov.l	r0, @r1

	mov.l	SDMR3_A, r1
	mov.l	SDMR3_D, r0
	add	r0, r1
	mov	#0, r0
	mov.w	r0, @r1

	rts
	nop

	.align 4

/*
 * Configuration for MPR2 A.3 through A.7
 */

/*
 * PLL Settings
 */
FRQCR_D:	.long	0x1103		/* I:B:P=8:4:2 */
WTCNT_D:	.long	0x5A00		/* start counting at zero */
WTCSR_D:	.long	0xA507		/* divide by 4096 */

/*
 * Spansion S29GL256N11 @ 48 MHz
 */
CS0BCR_D:	.long	0x12490400  /* 1 idle cycle inserted, normal space, 16 bit */
CS0WCR_D:	.long	0x00000340  /* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */

/*
 * Samsung K4S511632B-UL75 @ 48 MHz
 * Micron MT48LC32M16A2-75 @ 48 MHz
 */
CS3BCR_D:	.long	0x10004400  /* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */
CS3WCR_D:	.long	0x00000091  /* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */
SDCR_D1:	.long	0x00000012  /* no refresh, 13 rows, 10 cols, NO bank active mode */
SDCR_D2:	.long	0x00000812  /* refresh */
RTCSR_D:	.long	0xA55A0008  /* 1/4, once */
RTCNT_D:	.long	0xA55A005D  /* count 93 */
RTCOR_D:	.long	0xa55a005d  /* count 93 */
SDMR3_D:	.long	0x440       /* mode register CL2, burst read and SINGLE WRITE */

/*
 * Registers
 */

FRQCR_A:	.long	0xA415FF80
WTCNT_A:	.long	0xA415FF84
WTCSR_A:	.long	0xA415FF86

#define BSC_BASE	0xA4FD0000
CS0BCR_A:	.long	BSC_BASE + 0x04
CS3BCR_A:	.long	BSC_BASE + 0x0C
CS0WCR_A:	.long	BSC_BASE + 0x24
CS3WCR_A:	.long	BSC_BASE + 0x2C
SDCR_A:		.long	BSC_BASE + 0x44
RTCSR_A:	.long	BSC_BASE + 0x48
RTCNT_A:	.long	BSC_BASE + 0x4C
RTCOR_A:	.long	BSC_BASE + 0x50
SDMR3_A:	.long	BSC_BASE + 0x5000