Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 | /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2013 Samsung Electronics * Sanghee Kim <sh0130.kim@samsung.com> * Piotr Wilczek <p.wilczek@samsung.com> * * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board. */ #ifndef __CONFIG_TRATS2_H #define __CONFIG_TRATS2_H #include <configs/exynos4-common.h> #define CONFIG_TIZEN /* TIZEN lib */ #define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 #endif /* TRATS2 has 4 banks of DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) /* select serial console configuration */ /* Console configuration */ #define CONFIG_BOOTCOMMAND "run autoboot" #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ #define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV #define CONFIG_ENV_OVERWRITE /* Tizen - partitions definitions */ #define PARTS_CSA "csa-mmc" #define PARTS_BOOT "boot" #define PARTS_QBOOT "qboot" #define PARTS_CSC "csc" #define PARTS_ROOT "platform" #define PARTS_DATA "data" #define PARTS_UMS "ums" #define PARTS_DEFAULT \ "uuid_disk=${uuid_gpt_disk};" \ "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ #define CONFIG_DFU_ALT \ "u-boot raw 0x80 0x800;" \ "/uImage ext4 0 2;" \ "/modem.bin ext4 0 2;" \ "/exynos4412-trats2.dtb ext4 0 2;" \ ""PARTS_CSA" part 0 1;" \ ""PARTS_BOOT" part 0 2;" \ ""PARTS_QBOOT" part 0 3;" \ ""PARTS_CSC" part 0 4;" \ ""PARTS_ROOT" part 0 5;" \ ""PARTS_DATA" part 0 6;" \ ""PARTS_UMS" part 0 7;" \ "params.bin raw 0x38 0x8;" \ "/Image.itb ext4 0 2\0" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootk=" \ "run loaduimage;" \ "if run loaddtb; then " \ "bootm 0x40007FC0 - ${fdtaddr};" \ "fi;" \ "bootm 0x40007FC0;\0" \ "updatebackup=" \ "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \ " mmc dev 0 0\0" \ "updatebootb=" \ "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \ "mmcboot=" \ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \ "run bootk\0" \ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "verify=n\0" \ "rootfstype=ext4\0" \ "console=" CONFIG_DEFAULT_CONSOLE \ "kernelname=uImage\0" \ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \ "${kernelname}\0" \ "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \ "${fdtfile}\0" \ "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \ "mmcbootpart=2\0" \ "mmcrootpart=5\0" \ "opts=always_resume=1\0" \ "partitions=" PARTS_DEFAULT \ "dfu_alt_info=" CONFIG_DFU_ALT \ "uartpath=ap\0" \ "usbpath=ap\0" \ "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ "consoleoff=set console console=ram; save; reset\0" \ "spladdr=0x40000100\0" \ "splsize=0x200\0" \ "splfile=falcon.bin\0" \ "spl_export=" \ "setexpr spl_imgsize ${splsize} + 8 ;" \ "setenv spl_imgsize 0x${spl_imgsize};" \ "setexpr spl_imgaddr ${spladdr} - 8 ;" \ "setexpr spl_addr_tmp ${spladdr} - 4 ;" \ "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \ "spl export atags 0x40007FC0;" \ "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \ "mw.l ${spl_addr_tmp} ${splsize};" \ "ext4write mmc ${mmcdev}:${mmcbootpart}" \ " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \ "setenv spl_imgsize;" \ "setenv spl_imgaddr;" \ "setenv spl_addr_tmp;\0" \ CONFIG_EXTRA_ENV_ITB \ "fdtaddr=40800000\0" \ /* GPT */ /* Security subsystem - enable hw_rand() */ #define CONFIG_EXYNOS_ACE_SHA /* Common misc for Samsung */ #define CONFIG_MISC_COMMON /* Download menu - Samsung common */ #define CONFIG_LCD_MENU /* Download menu - definitions for check keys */ #ifndef __ASSEMBLY__ #define KEY_PWR_PMIC_NAME "MAX77686_PMIC" #define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1 #define KEY_PWR_STATUS_MASK (1 << 0) #define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1 #define KEY_PWR_INTERRUPT_MASK (1 << 1) #define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22 #define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33 #endif /* __ASSEMBLY__ */ /* LCD console */ #define LCD_BPP LCD_COLOR16 /* LCD */ #define CONFIG_BMP_16BPP #define CONFIG_FB_ADDR 0x52504000 #define CONFIG_EXYNOS_MIPI_DSIM #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54) #endif /* __CONFIG_H */ |