Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 | /* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2009 Samsung Electronics * Minkyu Kang <mk7.kang@samsung.com> * HeungJun Kim <riverful.kim@samsung.com> * Inki Dae <inki.dae@samsung.com> * * Configuation settings for the SAMSUNG SMDKC100 board. */ #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options * (easy to change) */ #define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */ #define CONFIG_S5P 1 /* which is in a S5P Family */ #define CONFIG_S5PC100 1 /* which is in a S5PC100 */ #include <asm/arch/cpu.h> /* get chip and board defs */ /* input clock of PLL: SMDKC100 has 12MHz input clock */ /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 /* Text Base */ /* * select serial console configuration */ /* PWM */ #define CONFIG_PWM 1 #define COMMON_BOOT "console=ttySAC0,115200n8" \ " mem=128M " \ " " CONFIG_MTDPARTS_DEFAULT #define CONFIG_EXTRA_ENV_SETTINGS \ "updateb=" \ "onenand erase 0x0 0x40000;" \ "onenand write 0x32008000 0x0 0x40000\0" \ "updatek=" \ "onenand erase 0x60000 0x300000;" \ "onenand write 0x31008000 0x60000 0x300000\0" \ "updateu=" \ "onenand erase block 147-4095;" \ "onenand write 0x32000000 0x1260000 0x8C0000\0" \ "bootk=" \ "onenand read 0x30007FC0 0x60000 0x300000;" \ "bootm 0x30007FC0\0" \ "flashboot=" \ "set bootargs root=/dev/mtdblock${bootblock} " \ "rootfstype=${rootfstype} " \ "ubi.mtd=${ubiblock} ${opts} " COMMON_BOOT ";" \ "run bootk\0" \ "ubifsboot=" \ "set bootargs root=ubi0!rootfs rootfstype=ubifs " \ " ubi.mtd=${ubiblock} ${opts} " COMMON_BOOT "; " \ "run bootk\0" \ "boottrace=setenv opts initcall_debug; run bootcmd\0" \ "android=" \ "set bootargs root=ubi0!ramdisk ubi.mtd=${ubiblock} " \ "rootfstype=ubifs init=/init.sh " COMMON_BOOT "; " \ "run bootk\0" \ "nfsboot=" \ "set bootargs root=/dev/nfs ubi.mtd=${ubiblock} " \ "nfsroot=${nfsroot},nolock " \ "ip=${ipaddr}:${serverip}:${gatewayip}:" \ "${netmask}:nowplus:usb0:off " COMMON_BOOT "; " \ "run bootk\0" \ "ramboot=" \ "set bootargs root=/dev/ram0 rw rootfstype=ext2" \ " console=ttySAC0,115200n8 mem=128M" \ " initrd=0x33000000,8M ramdisk=8192\0" \ "rootfstype=cramfs\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "meminfo=mem=128M\0" \ "nfsroot=/nfsroot/arm\0" \ "bootblock=5\0" \ "ubiblock=4\0" \ "ubi=enabled" /* * Miscellaneous configurable options */ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE (128 << 20) /* 0x8000000, 128 MB Bank #1 */ /*----------------------------------------------------------------------- * FLASH and environment organization */ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ #if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000) #define CONFIG_ENABLE_MMU #endif #ifdef CONFIG_ENABLE_MMU #define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000 #else #define CONFIG_SYS_MAPPED_RAM_BASE CONFIG_SYS_SDRAM_BASE #endif /*----------------------------------------------------------------------- * Boot configuration */ #define CONFIG_USE_ONENAND_BOARD_INIT #define CONFIG_SAMSUNG_ONENAND 1 #define CONFIG_SYS_ONENAND_BASE 0xE7100000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) /* * Ethernet Contoller driver */ #ifdef CONFIG_CMD_NET #define CONFIG_ENV_SROM_BANK 3 /* Select SROM Bank-3 for Ethernet*/ #endif /* CONFIG_CMD_NET */ #endif /* __CONFIG_H */ |